Abstract:One-step metal-assisted chemical etching (MACE) was used to fabricate porous silicon nanowire arrays. Also, the effects of doping level, AgNO3 concentration, and HF concentration on the morphology and structure of porous silicon nanowire were investigated. The results show that the higher doping level is beneficial for etching the silicon wafer and forming silicon nanowire arrays. This is because the higher doping level introduces more impurities and defects on the surface of the silicon wafer, and at the same time, the Schottky barrier between the silicon wafer with the higher doping level and the solution is lower. Thus, the silicon wafer is easier to oxidate to form nanowire arrays. The AgNO3 concentration plays a critical role in the fabrication of the porous silicon nanowire arrays during the one-step MACE process. If AgNO3 concentration is too low or too high, corrosion pits and collapsed clusters of nanowires could form on the surface of the silicon wafer. When AgNO3 concentration was 0.02 mol·L-1, silicon nanowires grew and became longer, eventually forming a porous array of silicon nanowire. In the meantime, as silicon nanowires grew, capillary stress between nanowires caused agglomeration at the top of some nanowires. Furthermore, when HF solution concentration exceeded 4.6 mol·L-1, the length of silicon nanowire increased with increasing HF concentration. Furthermore, a porous structure was formed on top the silicon nanowire, and the porosity of the silicon nanowires increased with increasing HF concentration. This was due to a large number of Ag+ random nucleations at the top of the nanowires, and lateral etching of the silicon nanowires occurred. In the end, the formation process of the porous silicon nanowires is explained by a model based on the experimental phenomena. It is attributed to the deposition of silver ions and the oxidation of dissolved silicon substrates.

Silver catalysis in the fabrication of silicon nanowire arrays

Metallization of Silicon Nanowires and Sers Response from A Single Metallized Nanowire

Electrochemical synthesis of silver oxide nanowires, microplatelets and application as SERS substrate precursors

Electrochemically Prepared Porous Silver and Its Application in Surface-Enhanced Raman Scattering

Controllable Growth of Silicon Nanowire Arrays Fabricated by Two-Step Silver Catalyzed Chemical Etching

Fabrication and characterization of polycrystalline silicon nanowires with silver-assistance by electroless deposition

Metal-Assisted Chemical Etching Using Tollen’s Reagent to Deposit Silver Nanoparticle Catalysts for Fabrication of Quasi-ordered Silicon Micro/Nanostructures

Research on synthesis and nucleation mechanism of silicon nanowire by silver catalysis in molten salt

Fabrication and Properties of Large-Area Silicon Nanowire Arrays

Roles of Ag in Fabricating Si Nanowires by the Electroless Chemical Etching Technique

Fabrication of Silver Nanowires in Situ in Si Chip Based on a Novel Electrochemical Method

Porous Silicon Nanowire Arrays Fabrication Through One-Step Metal-Assisted Chemical Etching

Fabrication of silver-coated silicon nanowire arrays for surface-enhanced Raman scattering by galvanic displacement processes

Catalysis of Dispersed Silver Particles on Directional Etching of Silicon

Si Nanowires Arrays Fabricated by Wet Chemical Etching for Antireflection and Self-Cleaning

OS1503 Development of Highly Ordered Silicon Nanowire Array

Silver Nanowires Eelectrodeposited from Reverse Hexagonal Liquid Crystals

Dendrite-Assisted Growth of Silicon Nanowires in Electroless Metal Deposition

Epitaxial growth of silver nanoislands on the surface of silicon nanowires in ambient air

Enhanced Raman Scattering of Silicon Nanowires by Ag Nanoparticles in‐situ Decoration

Single-crystalline Silver Nanowire Arrays Directly Synthesized Onto Substrates by Template-Assisted Chemical Wetting