Abstract:This paper investigates the clutch control problem for automotive transmission systems. This paper focuses on the pressure tracking control for a wet clutch, which has a much shorter stroke and asks for a more precise position and pressure regulation. The system dynamics are highly nonlinear, and the developed model includes unmodeled dynamics and parameter uncertainties. All these factors will influence the closed-loop system performance if not considered carefully during the control design, which makes the control synthesis for clutch systems challenging. Compared with the existing sliding-mode control (SMC) method, an improved method based on nonlinear sliding mode is presented in this paper to further improve the convergence rate and tracking precision of the closed-loop clutch system. This controller ensures that the pressure tracking error not only reaches the sliding manifold in finite time but converges to the equilibrium point in finite time as well. Moreover, considering the chattering phenomenon caused by high switching gains, a composite terminal SMC (TSMC) method based on uncertainty observer is proposed to reduce chattering. Using an extended state observer (ESO) technique, an uncertainty observer is designed for estimating the model uncertainties of pressure dynamics, pressure-reducing-valve flow dynamics, and estimation error of piston displacement. Then, a feedforward compensation term is combined with the terminal-sliding-mode feedback control. Thus, the composite terminal-sliding-mode controller may take smaller control gains for the whole pressure tracking procedure without sacrificing uncertainty compensation performance. Experimental results based on an xPC Target platform of the clutch system are provided to show the superiority of the proposed methods.

Research on Trajectory Tracking Control for Wet Clutch Engagement Based on SMC

Compound Sliding Mode Motion Trajectory Tracking Control of an Electro-Pneumatic Clutch Actuator While Maximizing Its Stiffness

Simultaneous Control of Motion and Maximized Stiffness for an Electro-Pneumatic Clutch Actuator Based on Pressure Observers

Design and Implementation of Clutch Control for Automotive Transmissions Using Terminal-Sliding-Mode Control and Uncertainty Observer

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Simulation Of Wet-Clutch Short-Time Load End Speed Control System On Amesim

Hierarchical Control of Starting Process for Wet Dual Clutch Transmission Based on Direct-Drive Pump-Controlled Hydraulic Actuator

A Modified Predictive Functional Control with Sliding Mode Observer for Automated Dry Clutch Control of Vehicle

System dynamic modelling and adaptive optimal control for automatic clutch engagement of vehicles

Trajectory-tracking Sliding Mode Control for Two-Wheeled Mobile Robot

Adaptive torque control of wet dual clutch based on dynamic friction coefficient estimation

Research on clutch position control based on backstepping method for small-sized tractors

Trajectory Tracking Control for WMRs with the Time-Varying Longitudinal Slippage Based on a New Adaptive SMC Method

Continuous Friction Feedforward Sliding Mode Controller for a TriMule Hybrid Robot

Improved Clutch Slip Control for Automated Transmissions

Control-oriented modeling of wet clutch friction considering thermal dynamics

Micro-slip Control and Torque Estimation for Dual Clutch Transmission

Model referenced adaptive control to compensate slip-stick transition during clutch engagement

Trajectory Tracking Control for Four-Wheel Independently Driven Electric Vehicle Based on Model Predictive Control and Sliding Model Control

The Trajectory Tracking of Hydraulic Servo System Via Sliding Mode Variable Structure Control in Very Low Velocity

Clutch Micro-Slip Control in Gearshifts for Dual Clutch Transmission