Abstract:A fiber Bragg grating (FBG) was created to accurately and simultaneously monitor the biohydrogen and metabolic heat production in biofilms containing Rhodopseudomonas palustris CQK-01 photosynthetic bacteria (PSB). The proposed hydrogen sensor was made from an FBG unit separated into two regions by a wet etching process; a thin region with a diameter of 15 μm was employed to monitor the temperature. A smaller region of the etched FBG with a diameter of 8.0 μm was coated with a 50 nm-thick Pd film by sputtering to determine the responses to the temperature and hydrogen concentration. To monitor the biohydrogen production and metabolic heat within the biofilms, three FBGs were evenly distributed in a polydimethylsiloxane channel (biofilm carrier) with vertical distances of 80 μm. In addition, the thickness, surface morphology, active biomass, and porosity of the biofilms were investigated. The FBG sensor can rapidly and accurately determine the difference in Bragg wavelength shifts caused by changes in the hydrogen concentration and temperature. The measured biohydrogen concentration is highly correlated with the real biohydrogen production with a correlation of 0.9765. The biohydrogen production capacity of PSB in the surface layer is much higher than that internally because of sharp decreases in the active biomass and porosity from the surface to within the biofilm. The highest biohydrogen concentration is obtained at 1.218 × 104 ppm for a biofilm thickness of 165 μm, and the temperature difference from metabolic heat production is ∼1.1 °C in the biofilm culture.

Biofilm Thickness and Temperature Sensor Based on Fiber Bragg Grating

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

Core-Offset-Based Fiber Bragg Grating Sensor for Refractive Index and Temperature Measurement

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

Design and Characteristics of Refractive Index Sensor Based on Thinned and Microstructure Fiber Bragg Grating

Highly sensitive fiber Bragg grating refractive index sensors

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

Refractive Index and Temperature Sensor Based on D-Shaped Fiber Combined With a Fiber Bragg Grating

Temperature compensated highly sensitive refractive index sensor based on Mach-Zehnder interferometer and FBG

Quasi-Distributed Temperature and Strain Sensors Based on Series-Integrated Fiber Bragg Gratings

Microchanneled Chirped Fiber Bragg Grating Formed by Femtosecond Laser-Aided Chemical Etching for Refractive Index and Temperature Measurements

Monitoring Biohydrogen Production and Metabolic Heat in Biofilms by Fiber Bragg Grating Sensors

Shallow-Tapered Chirped Fiber Bragg Grating Sensors for Dual Refractive Index and Temperature Sensing

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement

Fiber Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on Internal-and- External-Cavity Fabry–Pérot Interferometer Configuration

Simultaneous Measurement of Temperature and Strain Based on Fiber Loop Mirror Combined with Fiber Bragg Grating

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method