Abstract:An optical fiber high-temperature strain sensor is proposed and fabricated which is formed by combining an in-line photonic crystal fiber Fabry-Perot interferometer（FPI） with an air bubble cavity and a long-period fiber grating（LPFG） written in a standard single mode fiber using high-frequency CO2 laser.The in-line FPI was constructed by directly splicing a mutimode photonic crystal fiber（MPCF） to a conventional single mode fiber with a commercial splicer.The air microbubble inserted between the two fibers has two smooth glass-air interfaces separated by a distance L as two reflective mirrors of the FPI.Due to big air holes in the cladding of MPCF and its large numerical aperture,this device has higher signal-to-noise ratio and fringe contrast.In addition,the bubble usually does not reduce the ultimate strength of a fusion splice,the since surface tension ensures that they have smooth walls which do not serve as stress concentrations or crack nucleation sites,so such a FPI can be used as an ideal strain sensor under high temperatures.The LPFG written by high-frequency CO2 laser can survive high temperatures up to 800 ℃ and has relatively high temperature sensitivity.Therefore,simultaneous measurements of high-temperature and strain can be realized by monitoring the wavelength shifts of the FPI and LPFG.The experimental results show that this method has strain sensitivity of 2.7 pm/με and temperature sensitivity of 0.07 nm/℃,meeting the requirements for practical applications.

PCF-based Fabry-Pérot interferometric sensor for strain measurement at high temperatures

Pcf-Based Fabry-Perot Interferometric Sensor For Strain Measurement Under High-Temperature

Temperature and Strain Response of In-Fiber Air-Cavity Fabry-Perot Interferometer under Extreme Temperature Condition

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

High-temperature Measurement by Using a PCF-based Fabry–Perot Interferometer

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

High Temperature Strain Sensor Based on In-Line Fabry-Perot Interferometer Formed by Hollow-Core Photonic Crystal Fiber

Microbubble based fiber-optic Fabry-Perot interferometer formed by fusion splicing single-mode fibers for strain measurement.

Hybrid Structured Fiber-Optic Fabry-Perot Interferometer for Simultaneous Measurement of Strain and Temperature

A Composite Fabry-Perot Interferometric Sensor with the Dual-Cavity Structure for Simultaneous Measurement of High Temperature and Strain

Research on Discriminating Measurement of High-Temperature and Strain Based on In-Line MPCF-FPI Combined with a LPFG

A Fabry-Perot Interferometer for Simultaneous Measuring Temperature and Strain Based on Sapphire-Derived Fiber-Air

Sapphire derived fiber based Fabry-Perot interferometer with an etched micro air cavity for strain measurement at high temperatures.

A Fabry–Perot Interferometer Strain Sensor Based on Concave-Core Photonic Crystal Fiber

A High-Temperature Resistant Photonic Crystal Fiber Sensor with Single-Side Sliding Fabry-Perot Cavity for Super-Large Strain Measurement

High-temperature Sensor Using a Fabry-Perot Interferometer Based on Solid-Core Photonic Crystal Fiber

Micro Fabry-Perot interferometers in silica fibers machined by femtosecond laser.

Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements.

High-sensitivity Strain Sensor with an In-Fiber Air-Bubble Fabry-Perot Interferometer

Cascaded FPI/LPFG Interferometer for High-Precision Simultaneous Measurement of Strain and Temperature

A Fabry-Perot Interferometer Based on Probe-Embedded Bubble for Ultrasensitive Strain Measurement