Effect of the grease thickener on tribological properties of Si3N4/GCr15 contact interface and the performance in hybrid ceramic ball bearing
Can Wu,Zheng Liu,Huijun Zhao,Haining Yang,Xinglin Li,Jing Ni
DOI: https://doi.org/10.1016/j.ceramint.2023.02.047
IF: 5.532
2023-06-01
Ceramics International
Abstract:Si3N4 hybrid bearings are considered the most promising motor bearings due to their characteristics of electrical insulation, high speed, low friction coefficient, and wear resistance, which can better meet the requirements of driving motors of electric vehicles. However, the tribological mechanism between the ceramic-grease-steel complex interface is unclear. Three kinds of greases, namely lithium, polyurea, and calcium sulfonate complex grease, were synthesized from poly alpha olefin 40 as base oil. The effects of grease thickener morphology on the tribological properties of Si3N4/GCr15 contact surfaces at different slip speeds were investigated, and the vibration and friction torque performances in 6204 hybrid ceramic balls were evaluated. The results showed that the thickener could form physical deposition film and friction film to protect the worn surface at low speed. The friction and wear conditions were significantly improved at high speed under lithium grease and polyurea grease lubrication, being a mixed lubrication state. In presence of lithium grease, the tribological performance of the Si3N4/GCr15 interface and the vibration performance, impacted condition, starting torque, and friction torque of the hybrid ceramic ball bearings were all the best. Because lithium grease is subjected to continuous shear of the ceramic ball, which releases the base oil stably, and forms a thick oil film with the broken thickener in the center of the raceway, the bearing is in a mild lubrication state. Therefore, for Si3N4 hybrid ceramic ball bearings, lithium grease is a lubricant with good application prospects.
materials science, ceramics