Abstract:There are many mass-transfer models for predicting VOC emissions from building materials described in the literature. In these models, the volatile organic compound (VOC) emission rate and its concentration in a chamber or a room are usually obtained by analytical method or numerical method. Although these methods demonstrate some salient features, they also have some flaws, e.g., for analytical method the solutions of both room or chamber VOC concentration and building material VOC emission rate are constituted of the sum of an infinite series, in which additional computation for finding roots to a transcendental function is necessary, but sometimes quite complicated. Besides, when it is applied in complex cases such as multilayer emission with internal reaction, the solution is very difficult to get; for conventional numerical methods such as finite difference method, discrete treatment of both time and space may cause calculation errors. Considering that, the state-space method widely used in modern automation control field and the heat transfer field is applied to simulate VOC emissions from building materials. It assumes that a slab of building material is composed of a number of finite layers, in each of which the instantaneous VOC concentration is homogenous during the entire process of emission, while the time is kept continuous. Based on this assumption we can predict both the VOC emissions rate and the concentrations of VOCs in the air of a chamber or room. The method is generally applied to simulate VOC emissions from arbitrary layers of building materials, and the solution is explicit and simple. What's more, the method can be applied to the cases where a reaction producing/removing VOC in building materials exists. For some specific cases the method is validated using the experimental data and the analytical solutions in the literature. The method provides a simple but powerful tool for simulating VOC emissions from building materials, which is especially useful in developing indoor air quality (IAQ) simulation software.

VOC emission from a multi-layer work surface (panel) of a workstation system

Volatile organic compound emissions in building materials

Volatile Organic Compounds in Different Interior Construction Stages of an Apartment

Volatile Organic Compounds (Vocs) Concentration Simulation Of A Newly Decorated Residential Unit

Simulation of Voc Emissions from Building Materials by Using the State-Space Method

Study on Characteristics of Double Surface VOC Emissions from Dry Flat-Plate Building Materials

VOC emissions from two-layer building and vehicle cabin materials: Measurements and independent validation

Characteristics of Volatile Organic Compounds (vocs) Emission from Electronic Products Processing and Manufacturing Factory

Modeling Volatile Organic Compound (VOC) Concentrations Due to Material Emissions in a Real Residential Unit. Part I: Methodology and a Preliminary Case Study

Characterisation of VOC and Formaldehyde Emission from Building Materials in a Static Environmental Chamber: Model Development and Application

Control of volatile organic compounds indoors—Development of an integrated mass-transfer-based model and its application

A new method of measuring VOC emission characteristics of dry building materials

A Pre-Assessment and Pollution Prevention Tool for Indoor Volatile Organic Compound Simulations During the Interior Design Stage

Emissions of Semi-Volatile Organic Compounds from Architectural Coatings and Polyvinyl Chloride Floorings: Microchamber Method

Field investigation of pollutant characteristics and targeted ventilation control strategies in high-ceiling aircraft spraying workshop

Predicting the emissions of VOCs/SVOCs in source and sink materials: Development of analytical model and determination of the key parameters

Simulated Study on Typical Sources of Volatile Organic Compounds (vocs) in Indoor Air

Modeling Double Surface Voc Emissions From Plat-Plate Building Materials Under Asymmetric Convective Conditions

A General Model For Analyzing Voc Emissions From Multi-Layer Dry Building Materials With Double Emission Surfaces

Analytical solution and dimensionless correlations for VOC emissions from dry building materials in static chamber

Research on characteristics of VOCs in university laboratories based on environmental monitoring and discussion on treatment strategy