Abstract:Building envelopes are usually comprised of several different layers of building materials, which may alternatively act as VOC sources or sinks depending on their emission and sorption potentials and the indoor environmental conditions as well. In this research, a whole room IAQ model consisting of multi-phase emission/sorption model for wall materials and room volume mass balance model catering for practical ventilation schemes was developed. The interactions of VOC and building materials composing different building components can be modeled based on fundamental mass transfer theories. The effects of various construction materials and ventilation strategies on the emission characteristics were investigated. Results show that measures like pre-occupancy flush-out, lead-time ventilation, etc. have substantial impacts on indoor VOC concentration and the model can successfully handle different building scenarios. Although more rigorous validation, in particular more experimental verification, is needed, the proposed model has proven to be valuable in handling different building scenarios. It is useful in analyzing the levels of contaminant buildup that would occur during no ventilation period for intermittent ventilation situations and in determining the amount of outdoor air and the lead-time period required to flush out the contaminants prior to occupancy. It is likely to be a simple routine tool for building owners, designers and operators to attain acceptable indoor VOC concentration level.

Study on Characteristics of Double Surface VOC Emissions from Dry Flat-Plate Building Materials

Modeling Double Surface Voc Emissions From Plat-Plate Building Materials Under Asymmetric Convective Conditions

A General Model For Analyzing Voc Emissions From Multi-Layer Dry Building Materials With Double Emission Surfaces

A General Model for Analyzing Single Surface VOC Emission Characteristics from Building Materials and Its Application

The Multi-Layer Model For Voc Emissions From Dry Building Material With Double Emisssion Surfaces: Validation And Applications

General Analytical Mass Transfer Model for VOC Emissions from Multi-Layer Dry Building Materials with Internal Chemical Reactions

An improved mass transfer based model for analyzing VOC emissions from building materials

A new method of measuring VOC emission characteristics of dry building materials

A new mass transfer based model of VOC emissions from building materials

An Analytical Mass Transfer Model for Predicting VOC Emissions from Multi-Layered Building Materials with Convective Surfaces on Both Sides

Review of volatile organic compounds emission models for indoor environment

A general analytical model for formaldehyde and VOC emission/sorption in single-layer building materials and its application in determining the characteristic parameters

VOC emissions from two-layer building and vehicle cabin materials: Measurements and independent validation

Early-Stage Emissions of Formaldehyde and Volatile Organic Compounds from Building Materials: Model Development, Evaluation, and Applications.

Characterisation of VOC and Formaldehyde Emission from Building Materials in a Static Environmental Chamber: Model Development and Application

Characteristics and Correlations of VOC Emissions from Building Materials

Analytical solution and dimensionless correlations for VOC emissions from dry building materials in static chamber

Control of volatile organic compounds indoors—Development of an integrated mass-transfer-based model and its application

Measuring VOC Emission Characteristics of Building Materials in an Airtight Chamber

Volatile Organic Compounds in Different Interior Construction Stages of an Apartment

Applying C-history method to measure the VOC emission parameters of building material and furniture: Tests and validation