Abstract:Low ductility and strength are major bottlenecks against Mg alloys’ wide applications. In this work,we systematically design the composition and fabrication process for a low-alloyed Mg-Zn-Ca alloy,showing that it can be extruded at low temperatures（～250℃） and high speeds（～2 mm/s）. After the extrusion, this alloy exhibits a substantially weakened basal texture, relatively small grain size, very high tensile elongation（～30%）, and good strength. The origin of the considerably improved ductility was studied using a combination of three-dimensional atom probe tomography（3D-APT）, transmission electron microscopy（TEM）, electron backscattered diffraction（EBSD） in conjunction with surface slip trace analysis, in-situ synchrotron X-ray diffraction, and elasto-plastic self-consistent（EPSC） modeling.Co-segregation of Zn and Ca atoms at a grain boundary is observed and associated with texture weakening and grain boundary mediated plasticity, both improving the ductility. While basal slip and prismatic slip are identified as the dominant deformation systems in the alloy, the ratio between their slip resistances is substantially reduced relative to pure Mg and most other Mg alloys, significantly contributing to the improved ductility of the alloy. This Mg-Zn-Ca alloy exhibiting excellent mechanical properties and low fabrication cost is a promising candidate for industrial productions.

Plastic Formability and Auto Demonstration Parts of Mg-Nd-Zn-Zr Magnesium Alloy

Forgeability and Die-Forging Forming of Direct Chill Casting Mg–Nd–Zn–Zr Magnesium Alloy

Plastic Flow Behavior of a High-Strength Magnesium Alloy NZ30K

Formability, Mechanical and Corrosive Properties of Mg–Nd–Zn–Zr Magnesium Alloy Seamless Tubes

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Microstructure and Mechanical properties of Extruded Mg-3Nd-0.2Zn-0.4Zr (wt. %) Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Hot Deformation Behavior and Microstructural Evolution of Mg-Nd-Zn-Zr Magnesium Alloy

Microstructure and mechanical properties of Mg–4Al–4Nd–0.5Zn–0.3Mn alloy

High Cycle Fatigue of Cast Mg-3Nd-0.2Zn Magnesium Alloys

Microstructural Evolution and Mechanical Properties of Mg-5y-5gd-Xnd-0.5zr Magnesium Alloys at Different States

Improved high cycle fatigue properties of a new magnesium alloy

Microstructure Characteristic and Mechanical Properties of High-Strength Mg-Nd-Zn-Zr Alloy Seamless Tube Produced by Integrated Extrusion

Study on the Microstructure and Mechanical Property of High Strength Mg-Nd-Zn-Zr Alloy

Microstructure and mechanical properties of NZ30K alloy by semi-continuous direct chill and sand mould casting processes

Effects of Grain Size and Heat Treatment on the Tensile Properties of Mg–3Nd–0.2Zn (wt%) Magnesium Alloys

Origins of High Ductility Exhibited by an Extruded Magnesium Alloy Mg-1.8Zn-0.2Ca: Experiments and Crystal Plasticity Modeling

Microstructure, mechanical properties and fracture behaviors of large-scale sand-cast Mg-3Y-2Gd-1Nd-0.4Zr alloy

Study on high cycle fatigue behavior of gravity cast Mg-3Nd-0.2Zn-Zr magnesium alloy

Microstructures and Mechanical Properties of As-Cast and As-Extruded Mg-4.50zn-1.13ca (wt%) Alloys

A novel die-casting Mg alloy with superior performance: Study of microstructure and mechanical behavior