Abstract:Electromyography (EMG) is a valuable diagnostic tool for detecting neuromuscular abnormalities. Implantable epimysial electrodes are commonly used to measure EMG signals in preclinical models. Although classical resources exist describing the principles of epimysial electrode fabrication, there is a sparsity of illustrative information translating electrode theory to practice. To remedy this, we provide an updated, easy-to-follow guide on fabricating and testing a low-cost epimysial electrode. Electrodes were made by folding and inserting two platinum-iridium foils into a precut silicone base to form the contact surfaces. Next, coated stainless steel wires were welded to each contact surface to form the electrode leads. Lastly, a silicone mixture was used to seal the electrode. Ex vivo testing was conducted to compare our custom-fabricated electrode to an industry standard electrode in a saline bath, where high levels of signal agreement (sine [intraclass correlation - ICC= 0.993], square [ICC = 0.995], triangle [ICC = 0.958]), and temporal-synchrony (sine [r = 0.987], square [r = 0.990], triangle [r= 0.931]) were found across all waveforms. Low levels of electrode impedance were also quantified via electrochemical impedance spectroscopy. An in vivo performance assessment was also conducted where the vastus lateralis muscle of a rat was surgically instrumented with the custom-fabricated electrode and signaling was acquired during uphill and downhill walking. As expected, peak EMG activity was significantly lower during downhill walking (0.008 ± 0.005 mV) than uphill (0.031 ± 0.180 mV, p = 0.005), supporting the validity of the device. The reliability and biocompatibility of the device were also supported by consistent signaling during level walking at 14 days and 56 days post implantation (0.01 ± 0.007 mV, 0.012 ± 0.007 mV respectively; p > 0.05) and the absence of histological inflammation. Collectively, we provide an updated workflow for the fabrication and testing of low-cost epimysial electrodes.

A Research on Implantable Microelectrodes for EMG Signal Acquisition

Progress In Research Of Flexible Mems Microelectrodes For Neural Interface

Neurophysiological Evaluation of a Customizable Μecog-Based Wireless Brain Implant

Towards Improving the Quality of Electrophysiological Signal Recordings by Using Microneedle Electrode Arrays

Development of a Low-cost Epimysial Electromyography Electrode: A Simplified Workflow for Fabrication and Testing

Development of silicon-based microelectrode array

A Novel Exoskeleton Neuromuscular Interface Based on Motor Unit Action Potential Model Using High-Density Semg

Encapsulation and Evaluation of a MEMS-Based Flexible Microelectrode Array for Acute In-Vivo Experiment

Studies on MEMS Neural Micro Probe

Using microneedle array electrodes for non-invasive electrophysiological signal acquisition and sensory feedback evoking

Flexible Silk Fibroin-Based Microelectrode Arrays for High-Resolution Neural Recording

Distributed implantation of a flexible microelectrode array for neural recording

Skin-integrated, biocompatible, and stretchable silicon microneedle electrode for long-term EMG monitoring in motion scenario

Electrodes for Nerve Recording and Stimulation

Parylene-based Implantable Pt-black Coated Flexible 3-D Hemispherical Microelectrode Arrays for Improved Neural Interfaces

Fabrication And Characterization Of Micro-Nano Electrodes For Implantable Bci

Surgical Suture Inspired Wire Microelectrodes Implant for Enhancing Functional Electrical Stimulation

Fabrication of Parylene-Based Flexible Microelectrode Arrays

Implantable Neural Microelectrodes: How to Reduce Immune Response.

Implantable Electrochemical Microsensors for in Vivo Monitoring of Animal Physiological Information

Flexible Multi-Channel Microelectrode with Fluidic Paths for Intramuscular Stimulation and Recording