Abstract:Multilevel inverters typically require a large number of power switches, increasing the likelihood of faults and compromising system reliability. To enhance inverter reliability, this article introduces a five-level multilevel inverter with fault-tolerant capabilities. This topology employs two DC voltage sources with four unidirectional and two bidirectional power IGBT switches. A fault-tolerant control strategy has been developed to reconfigure the topology whenever an open circuit fault occurs in a switch. To evaluate the proposed topology, a loss analysis and efficiency assessment were conducted using Piecewise Linear Electrical Circuit Simulation. The results showed 36.35 W of power loss and an efficiency of 96.49% for 1 kW of output power. The total standing voltage per unit and cost function of the proposed topology are 6 and 4.2, respectively, which are minimal compared to other fault-tolerant topologies. Furthermore, a laboratory prototype was developed using a DSPACE-1202 controller to validate the results. The voltage stress on the power devices was found to be reduced by 25–50% under various post-fault conditions compared to healthy condition. The proposed topology is able to withstand OC fault in single unidirectional switch or multiple unidirectional switches and still be able to generate 64% of the rated output rms voltage. If an OC fault occurs in any of the bidirectional switches, then the topology is fully tolerant by generating 100% of the rated output rms voltage. The reliability for the proposed topology is performed using Markov chain rule and proved that the proposed topology is superior to other topologies.

A Novel Topology of Fault-Tolerant Three-Phase Four-Switch Grid-Connected Inverter Based on Space Vector Hysteresis Control

Research on High Efficient Micro PV Grid-connected Inverter with Low Input Voltage

A High Efficiency Soft Switching Three-phase Grid-connected Inverter

A ZVS Grid-Connected Three-Phase Inverter

A fault-tolerant T-type three-level inverter system

Robust Control for Single Phase Grid-connected Inverters

A Novel Topology of Parallel Connection of Voltage-fed Inverters for Induction Heating

A Family of Novel Zero-Voltage Switching Three-Phase PWM Converters Topology for Distributed Generation

FAULT-TOLERANT THREE-PHASE FOUR SWITCH GRID-CONNECTED INVERTER BASED ON SLIDING MODE CONTROL

A Novel Fault-Tolerant Control Scheme for Shunt Active Power Filter with High Reliability

A novel fault-tolerant Shunt Active Power Filter and its control strategy

Topology, Control and Fault Analysis of a New Type HVDC Breaker for HVDC Systems

A novel control method for dual mode time-sharing grid-connected inverter

Overview of Multi-Functional Grid-Connected Inverters

Topology and control of multi-functional grid-connected inverter

A Novel Hybrid T-Type Three-Level Inverter Based on SVPWM for PV Application.

Analysis on PWM Inverters Reliabilities and Novel Remedial Control Strategy for Fault-tolerant Topology

Novel Topology and Control Strategy of HVDC Grid Connection for Open Winding PMSG Based Wind Power Generation System

A Single-Phase Multilevel Inverter Topology with Fault Tolerant Capability for Single and Multiple Switch Failures

A Dead-beat Grid-connected Control Method of H6 Topology Based on Power Feed-forward Control

Topology and PWM Control Method of a Novel Voltage-Source Inverter