Abstract:Mode shapes (MSs) have been extensively used to detect structural damage. This paper presents two new non-model-based methods that use measured MSs to identify embedded horizontal cracks in beams. The proposed methods do not require any a priori information of associated undamaged beams, if the beams are geometrically smooth and made of materials that have no stiffness discontinuities. Curvatures and continuous wavelet transforms (CWTs) of differences between a measured MS of a damaged beam and that from a polynomial that fits the MS of the damaged beam are processed to yield a curvature damage index (CDI) and a CWT damage index (CWTDI), respectively, at each measurement point. It is shown that the MS from the polynomial fit can well approximate the measured MS and associated curvature MS of the undamaged beam, provided that the measured MS of the damaged beam is extended beyond boundaries of the beam and the order of the polynomial is properly chosen. The proposed CDIs of a measured MS are presented with multiple resolutions to alleviate adverse effects caused by measurement noise, and cracks can be identified by locating their tips near regions with high values of the CDIs. It is shown that the CWT of a measured MS with the n-th-order Gaussian wavelet function has a shape resembling that of the n-th-order derivative of the MS. The crack tips can also be located using the CWTs of the aforementioned MS differences with second- and third-order Gaussian wavelet functions near peaks and valleys of the resulting CWTDIs, respectively, which are presented with multiple scales. A uniform acrylonitrile butadiene styrene (ABS) cantilever beam with an embedded horizontal crack was constructed to experimentally validate the proposed methods. The elastic modulus of the ABS was determined using experimental modal analysis and model updating. Non-contact operational modal analysis using acoustic excitations and measurements by two laser vibrometers was performed to measure the natural frequencies and MSs of the ABS cantilever beam, and the results compare well with those from the finite element method. Numerical and experimental crack identification can successfully identify the crack by locating its tips.

Quantitative Identification of Wood Beam Damage Using Modal Curvature Theory

Application of modal-based damage-detection method to locate and evaluate damage in timber beams

Modal Strain Energy-Based Model Updating Method for Damage Identification on Beam-Like Structures

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Damage modes detection of composite laminates using improved modal strain energy method

Improved damage identification from modal strain energy change using high-order modal perturbation and modes division method

Fourier Spectral-Based Modal Curvature Analysis and Its Application to Damage Detection in Beams

Damage Detection in a Timber Beam

Damage Localisation and Severity Evaluation of a Beam-Like Timber Structure Based on Modal Strain Energy and Flexibility Approaches

Detecting Multiple Damages in UHPFRC Beams through Modal Curvature Analysis

Detecting multiple smallsized damage in beamtype structures by Teager energy of modal curvature shape

Damage Identification Analysis of Bridge Beam with Spaced Supports As Quasi-Periodic Structure

An Experimental Study on Damage Detection of Structures Using a Timber Beam

Structure Damage Diagnosis Based on Analyzing Changes of Vibration Mode

Damage Detection of Composite Structures Using Dynamic Analysis

Damage Identification Research on Beam Structures by Integrating Multiple Modal Parameters

Damage Identification Of The Multi-Box Girder Bridge By Modal Curvature Method

Identification of Damage in Beam Structures Based on Incomplete and Noise-polluted Modal Data

Damage Evaluation of A Repaired Timber Beam Using Modal-Based Method

Identification of Embedded Horizontal Cracks in Beams Using Measured Mode Shapes

Research on Structural Damage Identification of Shear Buildings Based on Modal Curvature Change