Abstract:Purpose The purpose of this study is to propose a simplifying approach for modelling a reliability test. Modelling the reliability tests of printed circuit board (PCB)/microelectronic component assemblies requires the adoption of several simplifying assumptions. This study introduces and validates simplified assumptions for modeling a four-point bend test on a PCB/wafer-level chip scale packaging assembly. Design/methodology/approach In this study, simplifying assumptions were used. These involved substituting dynamic imposed displacement loading with an equivalent static loading, replacing the spherical shape of the interconnections with simplified shapes (cylindrical and cubic) and transitioning from a three-dimensional modelling approach to an equivalent two-dimensional model. The validity of these simplifications was confirmed through both quantitative and qualitative comparisons of the numerical results obtained. The maximum principal plastic strain in the solder balls and copper pads served as the criteria for comparison. Findings The simplified hypotheses were validated through quantitative and qualitative comparisons of the results from various models. Consequently, it was determined that the replacement of dynamic loading with equivalent static loading had no significant impact on the results. Similarly, substituting the spherical shape of interconnections with an equivalent shape and transitioning from a three-dimensional approach to a two-dimensional one did not substantially affect the precision of the obtained results. Originality/value This study serves as a valuable resource for researchers seeking to model accelerated reliability tests, particularly in the context of four-point bending tests. The results obtained in this study will assist other researchers in streamlining their numerical models, thereby reducing calculation costs through the utilization of the simplified hypotheses introduced and validated herein.

Dynamic bending test and simulation of PBGA packages

Dynamic Substructure Method for Prediction of Solder Joint Reliability of IC Package under Drop Test

Experimental and numerical analysis of BGA lead-free solder joint reliability under board-level drop impact

An alternative JEDEC test board design and analysis

Thermal reliability analysis of package in PBGA

Failure Analysis of Board-Level Sn-Ag-Cu Solder Interconnections under JEDEC Standard Drop Test

Board Level Drop Test Analysis Based on Modal Test and Simulation

Modeling and Simulation of PCB Assembly under Board-Level Drop Impact

Simplifying finite elements analysis of four-point bending tests for flip chip microcomponents

Research on Reliability of Board Level Package-On-Package in Drop Test

Failure Mechanism and Predictive Modeling for Microbump Interconnects Drop Life Under Diverse Impact Angles in Advanced Packaging

Random Vibration Reliability of BGA Lead-Free Solder Joint

Reliability Evaluation of Board-Level Flip-Chip Package under Coupled Mechanical Compression and Thermal Cycling Test Conditions

Board-Level Drop Impact Reliability Analysis of Dual-Side Molding System-in- Package (SiP) Modules

Finite Element Analysis Simulations of Life Prediction for PBGA Soldered Joints under Thermal Cycling

Drop Test Simulation of 3d Stacked-Die Packaging with Input-G Finite Element Method

Experimental investigation on the failure of lead-free solder joints under drop impact

Experimental Tests and Stress Analysis of SnPb Solder Joints in a Ceramic PoP Device

Study on Lifetime Impact Factors of Solder Joint in PBGA Packaging

Effect of Fixation Method on Solder Joint Vibration Fatigue Reliability of High Density Pcb Assembly

Thermal Stress Measurement of Solder Joints in Bga Packages: Theoretical and Experimental