Abstract:The thermal shock test requires 20 to 50 cycles in the system test process,while the electromagnetic relay general specification requires only 5 cycles, the differences lead to the relay often failure during the test of thermal shock in the system. Electron microscopy scanning and fault tree analysis were used to analyze the causes of failure of relays after thermal shock test, and the conclusion is that the surface roughness of gold plated contacts and the contact pressure of closed contacts are the cause of this problem. In order to effectively control the adhesion of gold plated contacts, this paper analyzes the difference between domestic and foreign gold plated contacts,and verifies the optimized and improved gold plated contact surface treatment process. The design of the pressure related parameters of the closed contact was carried out by DOE experiment method. The reasonable contact surface treatment process and the control method of closed contact pressure were obtained. The results show that the use of SMAT and vibration pulse plating method can improve the relay contact surface roughness, reduce the adhesion of gold plated contact during the test of thermal shock,at the same time, it can find out the reasonable control parameters,which can ultimately improve the relay thermal shock performance and product quality.

The Effect Of Mechanical Parameters Of Switch-Type Contact On Relay Operation Characteristics

Research on the Influence of Contact Gap on AC Arc Duration of Electromagnetic Relay

Study on Switching Characteristics and Associated Degradation Mechanism of Contact Material under Capacitive Load

Failure Analysis of Electrical Contacts for Electromagnetic Relay With Switched Type Contacts

Mechanical and Electrical Characteristics of the Electromagnetic Relay under Vibration and Shock Environment

EFFECT OF CONTACT PARAMETERS ON NON-LINEAR VIBRATION CHARACTERISTICS OF ELECTROMAGNETIC RELAY

Investigation on Switching Capability of Bridge Structures Within Power Electromagnetic Relays

Preliminary study on switching characteristics of silver tin oxide type contacts for capacitive load

Experimental Investigation of Alternating Current Arc Behavior and Associated Contact Welding Failure for General-purpose Relay

The Discrimination of Contact Failure Mechanisms by Analyzing the Variations of Time Parameters for Relays.

Investigation of Switching Characteristics of Contact Materials for Inductive Load

Study on Failure Mechanism and Process Control of Thermal Shock on Electromagnetic Relay

Simulation and Experimental Study on Spring-back Suppression of Normally Open Relay Contacts

Simulation of Arcs for DC Relay Considering Different Impacts

Surge Load Experiment Design and Results Analysis of Relay

Research and application of testing and analyzing system for sealed relay's time parameters

Experimental Investigation of Contact Welding Characteristics of Electromechanical Relays

Failure Analysis of Power Relays with Multiple Breaks in the Electrical Endurance Experiments

Contact Welding Failure Analysis of Micro Electromagnetic Relays in Electrical Endurance Experiments

Study On Contact Failure Mechanisms Of Accelerated Life Test For Relay Reliability

Contact Vibration Characteristic of Electromagnetic Relay.