Abstract:Field X in offshore China has a target reservoir with characteristic of low resistivity and low permeability. Resistivity of the target zone is as low as 1 Ohm.m to 3 Ohm.m, while the surrounding calcareous interbeds have only slightly elevated resistivity of 2 to 5 Ohm.m. Besides this, the thickness of the target zone can be as thin as 1 m. Conventional resistivity based geosteering tool usually could not map these boundaries clearly, which often resulted in poor geosteering performance and sometimes sidetracks. A new directional resistivity tool with new sensor and newly invented measurements, along with a novel inversion process, brings hope to tackling the geosteering challenges in this type of environment. In addition to the axial and titled antennas that were already in the conventional tool, this new tool has introduced a transverse antenna that could better measure formation anisotropy and hence help delineating thin layers. A new family of deep resistivity measurements are also added to increase the detection range of the tool and the mapping capability for low resistivity environment. Finally, a new multi-layer deterministic parametric inversion method is designed and can take full advantage of the new measurements, to achieve higher resolution and larger depth of detection at the same time. The new tool was utilized in a recent infill campaign for the field X to place horizontal sections in this low resistivity payzone. With the improved mapping capability of the tool, the operator was able to geosteer within the thin and low resistivity target zone with high net-to-gross (NTG) and success rate. In one of the examples illustrated in this paper, the target zone was only 1.3m thick, with calcareous interbed above and below. The resistivity contrast was very limited, with resistivity of the target zone and the calcareous interbed less than 2 Ohm.m and 4 Ohm.m respectively. Under this very challenging environment, the operator achieved 861 m horizontal section with 100% NTG. The calcareous interbed below was mapped clearly which enabled the operator to make informed geosteering decisions to maximize reservoir exposure for horizontal sections. This new technology opened the door for developing the low resistivity pay in this field effectively. With the enhanced remote mapping capability, the operator now is able to drill longer horizontal sections with better NTG which ultimately helps achieve increased production.

Simulation of laterolog tool for geosteering and formation evaluation

Study on Numeric Simulation of Complex Resistivity Logging

A Novel Lateral Resistivity Logging-While-drilling (LWD) Method in Oil-Based Drilling Fluid

The Resistivity Imaging LWD Method Suitable for Oil-Based Drilling Fluid

Numerical Simulation of Dual Laterolog Response in Complex Stratum

Application of Gap Element to Nonlinear Mechanics Analysis of Drillstring

Signal detection of lateral resistivity LWD based on C4D technique with oil-based drilling fluid

A qualitative characteristic scheme and a fast distance prediction method of multi-probe azimuthal gamma-ray logging in geosteering

Dual laterolog borehole correction based on dynamic tool constants

Numerical simulation and dimension reduction analysis of electromagnetic logging while drilling of horizontal wells in complex structures

Simulation of Electromagnetic Logging-While-drilling Tools Using Vector Finite Element Methods

Numerical and physical simulations of array laterolog in deviated anisotropic formation

Induction Logging Through Casing by Detecting Lateral Waves: A Numerical Analysis

Application of Vector Finite Element Method to Simulat Elogging-While-drilling Resistivity Tools

Three-dimensional numerical calculation and case application of IP five-directional well logging

HAL6505 Array Laterolog Logging Tool

Simulation of tri-axial induction logging tools in layered anisotropic dipping formations

New Technology Enables Effective Geosteering Optimization in Low Resistivity Pay – Case Study from Offshore China

Interface Detection of Near-Borehole Stratified Formation under Different Permeabilities Based on Seismoelectric Logs: A Finite-Difference Modeling

Simulation of the Borehole Quasistatic Electric Field Excited by the Acoustic Wave During Logging While Drilling Due to Electrokinetic Effect

Borehole and crosshole seismic wave field forward modeling