Abstract:The aluminum foam sandwich (AFS), which perfectly combines the excellent merits of an aluminum foam core and face sheet materials, has extensive and reliable applications in many fields, such as aerospace, military equipment, transportation, and so on. Adhesive bonding is one of the most widely used methods to produce AFS due to its general applicability, simple process, and low cost, however, the bonding interface is known as the weak link and may cause a serious accident. To overcome the shortcomings of a bonded AFS interface, short carbon fiber as a reinforcement phase was introduced to epoxy resin to reinforce the interface adhesion strength of AFS. Single lap shear tests and three-point bending tests were conducted to study the mechanical behavior of the reinforced interface and AFS, respectively. The failure mechanism was studied through a macro- and microanalysis. The result showed that after the reinforcement of carbon fiber, the tangential shear strength of the interface increased by 73.65%. The effective displacement of AFS prepared by the reinforced epoxy resin is 125.95% more than the AFS prepared by the unreinforced epoxy resin. The flexure behavior of the reinforced AFS can be compared with AFS made through a metallurgical method. Three categories of reinforcement mechanisms were discovered: (a) the pull off and pull mechanism: when the modified carbon fiber performed as the bridge, the bonding strength improved because of the pull off and pull out of fibers; (b) adhesion effect: the carbon fiber gathered in the hole edge resulted in epoxy resins being gathered in there too, which increased the effective bonding area of the interface; (c) mechanical self-locking effect: the carbon fiber enhanced the adhesive filling performance of aluminum foam holes, which improved the mechanical self-locking effect of the bonding interface.

Direct Shear Study of Strengthening Layer Made of Continuous Carbon Fiber Fabric-Magnesium Oxychloride Cement Paste

Uniaxial Tensile Behavior of Anchored Carbon Fabric-Reinforced Cementitious Matrix Plates

Multi-scale Structure of In-Situ Polymerized Cementitious Composites with Improved Flowability, Strength, Deformability and Anti-Permeability

Feasibility Study of Strain Hardening Magnesium Oxychloride Cement-Based Composites

Epoxy Enhanced by Recycled Milled Carbon Fibres in Adhesively-Bonded CFRP for Structural Strengthening

Bond Performance of Hook-End Steel Fiber to the Mortars Cured for 360 Days

A Pull-out Equivalent Telescopic Layered Failure Model of Carbon Fiber Bundles in Seawater Sea-Sand Cementitious Matrix

Study on the Mechanical Properties and Strengthening Mechanism of Interface-Modified Carbon Fiber Mesh Reinforced Cement-Based Composites with SCA&HMC

Experimental Study on Improvement of Interfacial Bond Properties of Carbon Fiber Reinforced Cement Matrix Composites by Nano Silica

Interfacial bond between modified micro carbon fiber and high-strength cement paste in UHPC: Bond-slip tests and molecular dynamic simulation

Preparation of SiO2 coated carbon fibers and its interfacial properties with cement paste matrix

Investigation of the Bonding Performance and Microstructure of MOC Binders for SiO2 as Rock-like Composites

Comparative Study of Resin and Silane Coupling Agents Coating Treatments on Bonding Strength Improvement of Titanium and Carbon Fiber Composites

Enhancement of strength and ductility of cement-based composites by incorporating silica nanoparticle coated polyvinylalcohol fibers

Strengthening and Toughening Epoxy Composites by Constructing MOF/CF Multi-Scale Reinforcement

Investigation of Parameters Affecting the Bonding Performance of Carbon Fiber/Epoxy Composites

The Mechanical Behavior and Enhancement Mechanism of Short Carbon Fiber Reinforced AFS Interface

Understanding the Toughening Mechanism of Silane Coupling Agents in the Interfacial Bonding in Steel Fiber-Reinforced Cementitious Composites

Mechanical Properties and Enhancement Mechanism of Oil-Well Cement Stone Reinforced with Carbon Fiber Surfaces Treated by Concentrated Nitric Acid and Sodium Hypochlorite

Fabrication of carbon fiber reinforced aluminum matrix composites by inorganic binders

The fabrication of fiber-reinforced polyamine-coated silica paste and the mechanical properties of SiO2/SiO2 composites via stereolithography combined with silica sol impregnation