Abstract:Large ocean waves with large wave height may destroy the ship’s structure, whereas it is difficult to predict the nonlinear dynamic strength in the large waves. In this study, we used a nonlinear simulation based on boundary element method (BEM)-finite element method (FEM) and a collapse experiment of ship model to study dynamic ultimate strength and dynamic course of collapse of ship structure, the collapse test was performed in regular tank wave. Besides, a simulation method for nonlinear dynamic ship strength was proposed to predict and compare the results of collapse test. A collapsed model consisting of a plastic hinge and two ship strips is designed. Subsequently, we performed the nonlinear simulation of the ultimate strength of ship model induced by tank wave. Wave loads were calculated following potential theory and BEM. Next, ship structural FEM model was modeled, the ship pressure was transferred to ship wet surface elements, and inertia force was exerted as well. Finally, the nonlinear dynamic strength calculation of ship model was performed in accordance with nonlinear FEM. A four-point-bending test adopted displacement controlling method was designed to obtain the hysteresis characteristic of the elastoplastic hinge. Hysteretic test and simulation analysis was performed to determine post-ultimate bending moment. Time-domain computational results including rotation angle history and vertical bending moment are close to collapse test results so that the two methods are verified. This study verifies that structural nonlinearities of ship structure induced by wave loads could be predicted.

Comparison with structure performance to different forms of ship hull under wave loads

COMPARISON STUDY ON STRUCTURE FORMS OF GFRP SHIP HULL

COMPARISON ON STRUCTURAL PERFORMANCE OF FRP HULLS UNDER EQUIVALENT EXPLOSION LOADING

Optimization Analysis for the Typical Details of Ship Structures

Analysis on stern form characteristics of shuttle vessel based on wave-making resistance

Effects of design and fabrication of segmented ship models on test results of wave-induced loads

Mechanical properties analysis of the naval ship similar model with an integrated sandwich composite superstructure

Stress Variety in Ship Structure Damaged by Different Weapons and Its Effect Factors

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Investigation on hydrodynamics of fast ships with different bowshapes in waves and restricted waters

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Application of CFD and FEA Coupling to Predict Structural Dynamic Responses of A Trimaran in Uni- and Bi-Directional Waves

Analysis of effects of longitudinal partition bulkhead buckling on ship longitudinal strength

Analysis and Photoelastic Test on the Stress Concentration of Superstructure End and Broadside with Large Opening

The influence of lateral pressure on ultimate strength of ship structure

Ultimate Longitudinal Strength of Composite Ship Hulls

The Structural Analysis and Optimum of the Small Water Plane Area Twin Hull Ship

Numerical simulation of ship motion and non-linear sea loads of a modern frigate in regular waves

Influence of Bowshape on Hydrodynamic Performance of High Speed Vessels in Head Seas

Comparison of Safety Levels of Ship’s Hull Girders in Longitudinal Bending Designed by Different Criteria

Numerical and Experimental Investigation on Nonlinear Cyclic Collapse Response of Ship Model in Regular Waves