Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Experimental Study on Fracture Toughness of Steel Fiber-reinforced and Polymer-modified High-strength Concrete

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Development of a Steel Fiber-Reinforced Rubber Concrete for Jacketing of Bridge Piers Against Vehicular Impacts: Preliminary Results

Research on the Fracture Behavior of Steel-Fiber-Reinforced High-Strength Concrete

Fracture Property of Steel Fiber Reinforced Concrete at Early Age

Fracture Toughness of Steel Fiber Reinforced High Strength Concrete and Influencing Factors

Fracturing behaviors of FRP-strengthened concrete structures

Mechanical Properties of Polymer Modified Concrete with Steel Fiber

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Fracture Toughness of Ordinary Plain Concrete Under Three-Point Bending Based on Double-K and Boundary Effect Fracture Models

Experimental Study of Dynamic Tensile Strength of Steel-Fiber-Reinforced Self-Compacting Concrete Using Modified Hopkinson Bar

Experimental Research on Mechanical Properties of Fiber-Reinforced Polyurethane Elastic Concrete (FRPEC)

Experimental investigations on tensile strength and fracture toughness of a polyoxymethylene fiber reinforced concrete

The Influence of Steel Fiber Tensile Strengths and Aspect Ratios on the Fracture Properties of High-Strength Concrete

Experimental study of reinforced concrete beams reinforced with hybrid spiral-hooked end steel fibres under static and impact loads

Comparative Study On Influences Of Various Fibers On Fracture Properties Of Concrete

Experimental Study on Dynamic and Static Mechanical Properties of Steel Fiber Reinforced Concrete

Experimental investigation on the flexural performance and damage process of steel fiber reinforced recycled coarse aggregate concrete

Experimental Research on Crack Resistance of Steel–Polyvinyl Alcohol Hybrid Fiber-Reinforced Concrete

Study on equivalent fracture toughness of recycled steel fiber-reinforced concrete based on digital image correlation technology