Abstract:Five-axis machine tools are widely used in aerospace, die and mold industries. Most of the time, the tool path is described by connecting a series of short linear segments. The tangency discontinuity of the linear segments leads to the discontinuity of the kinematic profiles, hence generating discontinuous interpolation points, and resulting in fluctuation of machine motion, which reduces the machining efficiency and causes excessive tracking and contouring errors. This paper aims to generate smooth interpolation points at servo sample intervals with the proposed G 2 continuous five-axis corner rounding algorithm suitable for reducing feedrate fluctuation along the smoothed toolpath and improving machining efficiency, and the modified jerk-limited feedrate planning algorithm suitable for eliminating feedrate fluctuation within the feedrate planning units and improving interpolation computation efficiency. In this paper, the five-axis linear segments are first smoothed by curvature-optimized cubic Bezier splines, which reduces the number of the feedrate planning units along the smoothed toolpath and improves machining efficiency. Then, the jerk-limited feedrate planning algorithm is modified to ensure that the time interval of each different scheduled feedrate phase is an integer multiple of the axis position control loop closure time (i.e. servo sample interval), which eliminates the feedrate fluctuation within each feedrate planning unit and reduces the interpolation computation load of position command in each interpolation period (i.e. servo sample interval). At last, the effectiveness of the proposed algorithm is demonstrated with simulations and experiments following a five-axis, curved tool path on a CNC (Computer Numerical Control) machine tool.

Study on control algorithm for stone sculpture ground by 5-axis feed

Mathematic Model of Elliptic Curve to Grind Stone Sculpture with Multi-axis Control

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Research of Algorithm of Cutting Tool Radius Compensation in Five-axis CNC and Simulation of Numerical Control

Tool Positioning Algorithm Based on Smooth Tool Paths for 5-Axis Machining of Sculptured Surfaces

Study of Linear Feedrate Control in NC Machining

Tool Path Planning Algorithm for Five-Axis NC Machining of Sculptured Surfaces

Study on Control and Error Compensation Method of 3-Axis Surface Grinding for Knifes and Scissors

Motion Control Method of Spatial Surface Grinding for Knives and Scissors

Spline Interpolation Controller with Fairing Function for Five-Axis Machining

A Novel Minimum-Time Feedrate Schedule Method for Five-Axis Sculpture Surface Machining with Kinematic and Geometric Constraints

Research on Surface Tracking and Constant Force Control of a Grinding Robot

A smooth curve evolution approach to the feedrate planning on five-axis toolpath with geometric and kinematic constraints

Geometrical Error Analysis and Control for 5-Axis Machining of Large Sculptured Surfaces

Contact Force Plan and Control of Robotic Grinding Towards Ensuring Contour Accuracy of Curved Surfaces

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

Global smoothing for five-axis linear paths based on an adaptive NURBS interpolation algorithm

A Tool-path Planning Algorithm for Twin-cutters to Paralley Grind Sculptured Surface