Abstract:As sculptured surfaces are widely used in mechanical design, machining sculptured surface parts accurately is highly demanded in industry; however, it is quite challenging to meet their demand. Due to the geometric complexity of these surfaces, the tool-surface geometric mismatch always causes machining errors when the tool cuts along the tool paths. To prevent surface gouging, where the machining error is greater than the part tolerance, state-of-the-art CAM software usually determines cutter contact (CC) points on the tool paths first, and then simulates the machining to check the errors caused by this tool-surface mismatch. If surface gouging occurs, the CC points are adjusted using the CAM software. But this established method is quite time consuming and sometimes ineffective. To overcome these problems, a new system, based on the accurate predictions of machining errors, is proposed in this research paper for the optimization of CC points on the tool paths. First, two established CC point generation methods, the chordal deviation method and the circular arc approximation method, are introduced; and their limitations are addressed. Second, a sensitivity study of the machining errors with respect to the cutting tools is conducted. Then a system implementing the generic, geometric approach to accurate machining-error predictions is proposed to optimize CC points on the tool paths. Finally, this CC point optimization system is applied to two practical parts to demonstrate its advantages over the two established methods. This proposed work provides a profound understanding of the machining errors caused by the tool-surface mismatch and contributes to tool path planning for 3-axis CNC milling of sculptured surface parts.Copyright © 2006 by ASME

Geometrical Error Analysis and Control for 5-Axis Machining of Large Sculptured Surfaces

An accurate surface error optimization for five-axis machining of freeform surfaces

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

Geometric accuracy enhancement of five-axis machine tool based on error analysis

A Geometric Error Tracing Method Based on the Monte Carlo Theory of the Five-Axis Gantry Machining Center

A Generic, Geometric Approach to Accurate Machining-Error Predictions for 3-Axis CNC Milling of Sculptured Surface Parts: Part II — Applications and Analysis

Influence Analysis of Geometric Errors to Volumetric Machining Accuracy of a 5-Axis CNC Machine Tool

Control and Analysis of Nonlinear Error for 5-Axis Machining of Hybrid Machine Tool

An Approach to Enhancing Machining Accuracy of Five-Axis Machine Tools Based on a New Sensitivity Analysis Method

Multi-stage error compensation with closed-loop quality control in five-axis flank milling of sculptured surface

Accurate Modeling and Tool Orientation Compensation for Nonlinear Errors in Multi-axis NC Machining

A Generic, Geometric Approach to Accurate Machining-Error Predictions for 3-Axis CNC Milling of Sculptured Surface Parts: Part I — Modeling and Formulation

Geometric error modeling and sensitivity analysis of a five-axis machine tool

Tool Deflection Error Compensation in Five-Axis Ball-End Milling of Sculptured Surface

Identification of Integrated Geometric Errors of Rotary Axis and Setup Position Errors for 5-Axis Machine Tools Based on Machining Test

An Error Compensation Method for Multi-Axis Machining Based on the Actual Contour Measurement

An Accurate Characterization Method to Tracing the Geometric Defect of the Machined Surface for Complex Five-Axis Machine Tools

A methodology for systematic geometric error compensation in five-axis machine tools

A New Approach to Identify Geometric Errors Directly from the Surface Topography of Workpiece in Ultra-Precision Machining

An analytical approach for crucial geometric errors identification of multi-axis machine tool based on global sensitivity analysis

Geometric Error Measuring, Modeling, and Compensation for CNC Machine Tools:A Review