Abstract:A high-speed, low-power divide-by-3/4 prescaler based on an extended true single-phase clock D-flip flop (E-TSPC DFF) is presented. We added two more transistors and a mode control signal to the conventional E-TSPC based divide-by-4 divider to achieve the function of the divide-by-3/4 dual modulus frequency divider. The designed divide-by-3/4 achieved higher speed and lower power operation with mode control compared with the conventional ones. The prescaler was comprised of sixteen transistors and integrates an inverter in the second DFF to provide output directly. The power consumption was minimized due to the reduced number of stages and transistors. In addition, the prescaler operating speed was also improved due to a reduced critical path. We compared the simulation results with conventional E-TSPC based divide-by-3/4 dividers in the same process, where the figure-of-merit (FoM) of the proposed divider was 17.4–75.5% better than conventional ones. We have also fabricated the prescaler in a 40 nm complementary metal oxide semiconductor (CMOS) process. The measured highest operating frequency was 9 GHz with 0.303 mW power consumption under 1.35 V power supply, which agrees with the simulation well. The measurement results demonstrate that the proposed divider achieves high-speed and low-power operation.

A 50% Duty Cycle Wide-Locking Range Divide-by-3 Divider Up to 6Ghz

19.1 GHz 18 Mw Divide-by-3 Heterodyne Injection Locking Frequency Divider in 0.18 Μm CMOS Technology

A 3 Mw 54.6 GHz Divide-by-3 Injection Locked Frequency Divider with Resistive Harmonic Enhancement

A Wide Locking Range and Low Power V-band Frequency Divider in 90nm CMOS

A Low Power V-Band CMOS Frequency Divider with Wide Locking Range and Accurate Quadrature Output Phases.

A Dual-Mode Mm-Wave Injection-Locked Frequency Divider with Greater Than 18% Locking Range in 65nm CMOS

6.2 GHz 0.5 Mw Two‐dimensional Oscillator Array‐based Injection‐locked Frequency Divider in 0.18 Μm CMOS

Design and optimization of the ring oscillator based injection locked frequency dividers.

200Ghz CMOS Prescalers with Extended Dividing Range Via Time-Interleaved Dual Injection Locking

0.6Mw 6.3 Ghz 40nm Cmos Divide-By-2/3 Prescaler Using Heterodyne Phase-Locking Technique

0.6mW 6.3 GHz 40nm CMOS divide‐by‐2/3 prescaler using heterodyne phase‐locking technique

1 V 10 GHz CMOS frequency divider with low power consumption

0.8 Mw 1.1–5.6 GHz Dual-Modulus Prescaler Based on Multi-Phase Quasi-Differential Locking Divider

Design of 5GHz Dual-modulus Divide-by-31/32 Prescaler in TSMC 0.25μm Technology

Cmos Prescaler(S) With Maximum 208-Ghz Dividing Speed And 37-Ghz Time-Interleaved Dual-Injection Locking Range

Sub-mW Multi-Ghz CMOS Dual-Modulus Prescalers Based on Programmable Injection-Locked Frequency Dividers

A High-Speed Low-Power Divide-by-3/4 Prescaler Using E-TSPC Logic DFFs

A Cmos Frequency Divider for 2.4/5ghz Wlan Applications with A Simplified Structure

A 150ghz Injection-Locked Frequency Divider with 19.8% Locking Range Based on Adjustable Inductor Tuning Method in 65-Nm CMOS

A 12 GHz Divided-by-2 Frequency Divider Based on 90 Nm CMOS Process

A 30-Ghz to 39-Ghz Mm-Wave Low-Power Injection-Locked Frequency Divider in 65nm CMOS.