Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Determination Method of Critical Traffic Volume for Signal Setting at T-Intersections

Critical Traffic Volume of Traffic Signal Warrant at Major-Minor Intersections

Critical Traffic Volume Warrant of Signal Installing at Equal Weight Intersections

Critical traffic volume of traffic signal warrant under limited priority condition

Influence of signal on the capacity of signalized intersection

Critical volume of signal setting for pedestrian signal under branch road section

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Method of computing left-turn vehicle traffic capacity at two-phase intersection

Research on signal control methods of traffic bottlenecks in city road network

Calculation method of travel time of right-turn vehicle at motor-and nonmotor-vehicle mixed traffic intersection

Minimum Cycle Length of Two-Phase Road Intersection

Signal Timing Method of Right——turn Vehicles Based on Mixed Traffic

Critical Condition for Setting Left-turn Waiting Area

Modeling Capacity at Signalized Intersections with a Left-Turn Storage Bay Considering Signal Timing Plan

Inter-green interval calculation for signalized intersections

Simulation analysis of traffic signal control and transit signal priority strategies under Arterial Coordination Conditions

General Multi-Phase Intelligent Control Method for Traffic Flow at Single Intersection

Capacity of unsignalized intersection with mixed distribution headway

A Decentralized Model Predictive Traffic Signal Control Method with Fixed Phase Sequence for Urban Networks.

Planning methods and effect analysis of advance right-turn

Signal coordination control for traffic bottleneck using OD data