Abstract:This paper is focused on a dual-loop current control method (grid current loop and fundamental current loop) for digitally controlled LCL-type shunt active power filters (APFs). Normally, a proportional-resonant (PR) unit is used as the fundamental current controller, where the proportional part of PR unit actually serves as the proportional feedback of inverter-side current and provides a certain degree of damping for LCL resonance. However, its valid damping region is only up to one-sixth of the sampling frequency (fs/6), which leads to less robustness to the grid impedance. To address this issue, a delay-compensation control link is proposed in this paper to replace the proportional part of the PR fundamental current controller and widen the effective damping region. As a result, the system robustness is improved without adding extra sensors or introducing an extra active damping loop. Theoretical analysis proves that it can obtain a wider damping region of (0, fs/4). Moreover, a systematic controller parameter design criterion is studied. In particular, a numerical optimization algorithm is developed to optimize damping property, and a design method based on root locus plot and Bode diagram is presented to enhance harmonic compensation accuracy. Finally, experimental results implemented on a 30 kVA APF prototype have validated the feasibility of the proposed current controller and parameter design criterion.

Shunt active power filter with high steady-state performance based on LCL-filter

A Novel Control Approach for LCL-based Shunt Active Power Filter with High Dynamic and Steady-State Performance

Current Loop Control Approach for LCL-based Shunt Active Power Filter

Study on Shunt Active Power Filter with High Quality Grid Current Waveform

High-Performance Resonant Controller For Active Power Filter With Selective Harmonic Compensation

Research on PI and Repetitive Control Strategy for Shunt Active Power Filter with LCL-filter

Design and implementation of compound current control strategy for improved LCL-based Shunt Active Power Filter

Design of LCL-Filter Based Three-level Active Power Filter

Study on Large Power Shunt Active Power Filters with High Compensation Precision

Robust Current Control Method for LCL-Type Shunt Active Power Filters with Inverter-Side Current Feedback Active Damping

A Robust Dual-Loop Current Control Method with a Delay-Compensation Control Link for LCL-Type Shunt Active Power Filters

A Double-Loop Current Control Strategy for Shunt Active Power Filter with Lcl Filter

A simple method of realization of low power loss and high compensation-precision active power filter

A Current Control Method for LCL Active Power Filters Based on the Reduced Order Generalized Integrator

A Systematic Approach Via IIR Filters for Enhancing the Robustness of LCL-Type Shunt Active Power Filters to Grid Impedance

A Novel Active Damping Method for LCL-filter-based Shunt Active Power Filter

Control Strategy for Shunt Active Power Filters with High Compensation Precision

Parallel Converter Scheme for Large Power High Compensation Precision Shunt Active Power Filters

A waveform control technique for high power Shunt Active Power Filter based on repetitive control algorithm

Fast-Transient Repetitive Control Strategy for A Three-Phase Lcl Filter-Based Shunt Active Power Filter