Abstract:The membrane formation mechanism of PVDF/DMAc/H2O/Additive system was studied. The additive was PVP, PEG or LiCl respectively. The phase diagram for polymer solution of PVDF/DMAc/Water/Additive system was measured using cloud-point method. The phase separation phenomena during membrane formation process were recorded using light transmission experiment. The crystallinity of membrane was detected by DSC. The result shown both gelation and liquid-liquid demixing existed during phase-inversion process of casting solution with different additive. Gelation appeared early at lower nonsolvent concentration than liquid-liquid demixing in the range of 30 ∼ 60°C. LiCl as additive lead to a strong action for PVDF solution to form gel than PEG or PVP. This increased the mass transfer resistance in nascent membrane and the liquid-liquid demixing delayed time prolonged along with the sequence of PVP, PEG or LiCl as additive during membrane formation process. The polymer concentration of nascent membrane at the onset of liquid-liquid demixing increased and restricted the development of macrovoids. The strong gelation tendency of polymer solution intensified the solidification of nascent membrane and restricted the macrovoids development further. Thus the macrovoids structure extended to the bottom and stopped with the sponge-like structure when PVP was used as additive. When the additive was PEG or LiCl, the macrovoids developed insufficiently and terminated in the middle of membrane with the sponge-like structure and then passed to nodular structure in bottom. The effective porosity and flux decreased and crystallinity increased along with the sequence of PVP, PEG or LiCl as additive. The hydrophobicity of membrane with LiCl as additive was barely changed, but the water-resisting pressure of membrane with PVP or PEG as additive decreased about 20 kPa.

Effects of additives on the membrane performance of PVC/PVB blend ultrafiltration membrane

Synthesis of PVC-b-PEG Copolymer and Its Modification Effect on PVC Microfiltration Membrane

Influence of polyvinyl alcohol on the surface morphology, separation and anti-fouling performance of the composite polyamide nanofiltration membranes

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Influence of additives on phase separation process of PVDF solution and membrane morphology

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

In Situ Crosslinking of Hyperbranched Polyglycerol in Casting Solutions and Its Effect on the Structure and Properties of Porous Pvdf Membranes

Triblock copolymers of methyl methacrylate/N-vinyl pyrrolidone and their hydrophilication effects on poly(vinylidene fluoride) porous membranes

Effect of Additives on the Morphology and Performance of Symmetric Network PVDF Membranes

Membranes of poly (vinyl butyral) (PVB) or cationic PVB (CPVB) blended with poly (vinylidene fluoride) (PVDF) prepared by a nonsolvent induced phase separation method: Miscibility and hydrophilicity

Influence of Blending Ratio and Polymer Concentration on Miscibility of PVC/PVB and Property & Structure of Flat Ultra-Filtration Membrane

Preparation of poly (vinyl butyral) hollow fiber ultrafiltration membrane via wet-spinning method using PVP as additive

Poly(vinyl chloride) (PVC) hollow fiber ultrafiltration membranes prepared from PVC/additives/solvent

Improved permeability and antifouling properties of polyvinyl chloride ultrafiltration membrane via blending sulfonated polysulfone

Effects of Pore-Forming Additives on Structures and Properties of Pvdf/Fe3+/Cu2+ Hollow Fiber Membranes

Compatibility Properties of PVC/PES and Its Impact on Co-blend Ultrafiltration Membrane

Effect of Perfluorosulfonic Acid(PFSA)Content on the Performance of Polyvinyl Chloride-Perfluorosulfonic Acid(PVC-PFSA)Hollow Fiber Blend Ultrafiltration Membrane

Effect of Bore Fluid Composition on the Performance of PVC-PFSA Hollow Fiber Blend Membrane

Effect of Additives in the Casting Solutions on the Morphology and Performance of Pvdf Membranes

Study of poly(vinyl chloride)/polyether sulphone co-blend ultrafiltration membrane