Abstract:Many natural materials demonstrate ideal design inspirations for the development of lightweight composite materials with excellent damage tolerance. One notable example is the layered architecture of nacre, which possesses toughness an order of magnitude higher than its constituent parts. Man-made nacre-like ceramic/polymer composites obtained through direct infiltration of polymer in ceramic scaffolds have been shown to produce improved mechanical properties over other composite architectures. Replacing the polymer phase with metal could provide higher damage tolerance but the infiltration of metal into complex ceramic scaffolds is difficult due to the surface tension of molten metal. To address this, bioinspired nacre-like micro-layered (lL) alumina scaffolds with different ceramic fractions from 18 to 85% were infiltrated with aluminium alloy 5083 via pressureless and squeeze casting infiltrations techniques. The scaffolds were created using a bi-directional freeze-casting and one-step densification method. As a result, the lL alumina/aluminium composites displayed significant extrinsic toughening mechanisms with both high strength and toughness. The mechanical performance was highly dependent on the interface, microstructure, and composition. The nacre-like composites with 18% alumina and AlN interface displayed a maximum resistance-curve toughness up to around 70 MPa.m(1/2) (35 MPa.m(1/2) at the ASTM limit) and a flexural strength around 600 MPa. (C) 2022 The Author(s). Published by Elsevier Ltd.

Bio-mimetic metal matrix nanocomposites fabricated by flake powder metuallurgy

A Flake Powder Metallurgy Approach to Al2o3/Al Biomimetic Nanolaminated Composites with Enhanced Ductility

Fabrication of Nanocrystalline Zro2 Particle Reinforced Aluminum Alloy Composite by Squeeze Casting Route

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Bioinspired Hierarchical Al2O3/Al Laminated Composite Fabricated by Flake Powder Metallurgy

Nanostructured Composite Obtained by Mechanically Driven Reduction Reaction of Cuo and Al Powder Mixture

Flake thickness effect of Al2O3/Al biomimetic nanolaminated composites fabricated by flake powder metallurgy

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Development of Flake Powder Metallurgy in Fabricating Metal Matrix Composites: A Review

Multi-functional Amorphous/crystalline Interfaces Rendering Strong-and-ductile Nano-Metallic-glass/aluminum Composite

Nano-additive manufacturing of multilevel strengthened aluminum matrix composites

An Al-Al interpenetrating-phase composite by 3D printing and hot extrusion

Strong and ductile particulate reinforced ultrafine-grained metallic composites fabricated by flake powder metallurgy

Enhanced Strength and Ductility in Particulate-Reinforced Aluminum Matrix Composites Fabricated by Flake Powder Metallurgy

Balancing Strength and Ductility in Al Matrix Composites Reinforced by Few-Layered MoS2 through In-Situ Formation of Interfacial Al12Mo

Nacre-inspired , strong and ductile cnt / al composites fabricated by flake powder metallurgy

Enhanced distribution and mechanical properties of high content nanoparticles reinforced metal matrix composite prepared by flake dispersion

Balancing the strength and ductility of Ti2AlC/TiAl composite with a bioinspired micro-nano laminated architecture

Tailoring the structure and mechanical properties of graphene nanosheet/aluminum composites by flake powder metallurgy via shift-speed ball milling

Progress of Metal/Al_2O_3 Matrix Nanocomposites

Enhanced Mechanical Properties of Graphene (reduced Graphene Oxide)/Aluminum Composites with A Bioinspired Nanolaminated Structure