Abstract:Dual-phase reinforcing approach provides a novel and efficient strategy for the fabrication of advanced aluminum matrix composites (AMCs). The devisable and desirable performance could be achieved by tuning dual-phase reinforcing system. However, it is still challenging to design a dual-phase reinforcing system with synergistic strengthening effect, especially for the laser powder bed fusion (LPBF) characterized by nonequilibrium metallurgical process. In this work, we designed and fabricated dual-phase (TiN+AlN) particles (20 wt.%) reinforced pure Al by LPBF. The TiN and AlN can form a metastable ternary Ti 1-x Al x N solid solution in the whole range of composition, which is a promising reinforcing phase for AMCs. We observed novel microstructure in laser-fabricated composites under the action of dual-phase (TiN+AlN) ceramic particles and laser melting process. A gradient layer is formed on the surface of TiN particles. This interfacial structure can act as an anchor for ceramic particles in the Al matrix, which is beneficial to achieve a strong interface bonding and good load transfer. Besides this gradient layer, uniformly dispersed Ti 1-x Al x N nanoparticles were observed to precipitate, which can effectively hinder dislocation movement and refine grains. Furthermore, the pure Al and TiN/Al, AlN/Al composites were fabricated to compare and reveal the contributions of dual-phase (TiN+AlN) reinforcements. The tensile strength of the (TiN+AlN)/Al composite reach ∼254 MPa, improved by ∼75% and ∼81% compared with those of the TiN/Al and the AlN/Al composites, respectively. This novel microstructure about gradient layer and precipitated nanoparticles contributes to the high strengthening efficiency of the (TiN+AlN)/Al composite.

A Flake Powder Metallurgy Approach to Al2o3/Al Biomimetic Nanolaminated Composites with Enhanced Ductility

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Fabrication of Fully Dense Tial-Based Composite Sheets with A Novel Microlaminated Microstructure

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

An Al-Al interpenetrating-phase composite by 3D printing and hot extrusion

Balancing the strength and ductility of Ti2AlC/TiAl composite with a bioinspired micro-nano laminated architecture

Damping and mechanical behavior of graphene nanoplatelets reinforced Al-30Zn alloy matrix bioinspired laminated composites by two steps flake powder metallurgy

Microstructure and mechanical properties of bioinspired laminated Al matrix hybrid reinforced with B4C and graphene nanoplatelets

Balancing Strength and Ductility in Al Matrix Composites Reinforced by Few-Layered MoS2 through In-Situ Formation of Interfacial Al12Mo

Design of bimetallic interpenetrating biomimetic structures and additive-casting synergetic manufacturing

Enhanced distribution and mechanical properties of high content nanoparticles reinforced metal matrix composite prepared by flake dispersion

Ultrastrong and Deformable Aluminum-Based Composite Nanolaminates with Transformable Binary Intergranular Films

FABRICATION OF AA1100/Fl2O3 COMPOSITE STRIPS AND THE IMPROVEMENT OF THEIR ELECTROMAGNETIC, MECHANICAL AND FRACTURE PROPERTIES

Tailoring the structure and mechanical properties of graphene nanosheet/aluminum composites by flake powder metallurgy via shift-speed ball milling

Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Synergistic Strengthening Mechanisms of Dual-Phase (TiN+AlN) Reinforced Aluminum Matrix Composites Prepared by Laser Powder Bed Fusion

Fabrication, microstructure and compressive properties of Ti2AlC/TiAl composite with a bioinspired laminated structure

Preparation of graphene film reinforced CoCrFeNiMn high-entropy alloy matrix composites with strength-plasticity synergy via flake powder metallurgy method

Aluminum with dispersed nanoparticles by laser additive manufacturing