Abstract:Firstly,the 3D finite element model of a large-span transmission tow er lines system w ith main tow er height of 375m and main span of 2 756m is established using softw are SAP2000,and is transformed to ABAQUS finite element model by the developed interface program SAP2ABAQUS. Then,the approach for achieving the loading process of static effect under the gravity action is given explicitly by using long-period explicit dynamic loading method. By the approach,the shape finding of cable and its initial stiffness are finished under the gravity action,w hich further realized that gravity analysis could be performed subsequently w ith dynamic loading excited by the subsequent earthquake. Besides,the dynamic characters of four types of model w ith different boundary conditions are analyzed and compared,and from the comparison of model component before and after the transformation and their corresponding modal analysis results, the transformation accuracy through program SAP2ABAQUS is verified. Further,the program MEMS_ b V2012. 5 is updated to MEMS_ b V2013. 5 and the multi-point earthquake motions of target field are simulated. At last,considering geometric large deformation and differential input,the developed subroutine given by ABAQUS main program is used to analyze the elastoplastic and collapse of tow er-lines system. The actual engineering analysis results show that:( 1) The developed interface program SAP2ABAQUS is further verified to have reliable accuracy and high efficiency transformation from the aspect of actual engineering.( 2) The developed subroutine is feasible and reliable for analyzing actual engineering.( 3) The static gravity loading process realized by the long-period dynamic loading method w hich is reasonable in theory and feasible in real,and overcome the difficulty that implicit static gravity mode loading cannot be performed subsequently w ith explicit dynamic analysis.( 4) From modal and theory analysis,it show s that the necessity and reliability of selecting the system of four tow ers w ith three lines as analysis object.( 5) The consistency of multi-point earthquake motion and differential input have the significant influence on occurrence and developing distribution of plastic hinges. So,it is very necessary to consider the multipoint earthquake motions as input w hile analyzing the elasto-plastic responses of the similar structural system.

Broken Wire Analysis and Broken Wire Load Calculation of High Voltage Transmission Tower

Analysis on Broken Conductor Load of Suspension Tower for UHVDC Power Transmission

Mechanical Behavior Analysis of Key Nodes for Extra-highTransmission Tower Foundations

Study of Dynamic Impacts on Transmission-Line Systems Attributable to Conductor Breakage Using the Finite-Element Method

Corrosion-Fatigue Analysis of Wires in Bridge Cables Considering Time-Dependent Electrochemical Corrosion Process

Elasto-plasticity and Collapse Analysis for Large-span and High Structure(III)——Elasto-plastic and Collapse Analysis of Transmission-lines System under Multi-point Seismic Motions

Research of impact effect on transmission line system due to sudden breakage of conductor

Research on ice shedding and broken conductor in tower-line system based on CR method

Application of Finite Element Method in Analysis of Ice-shedding on High-voltage Power Transmission Line

Calculation and Analysis on Induced Voltage and Current of 1 000 Kv Transmission Line Adopting Structure of Double Circuit on the Same Tower

Stress state and failure path of a tension tower in a transmission line under multiple loading conditions

Analysis on Mechanical Property of 110kv Power Transmission Line Tower under Different Wind Speed

Simulation and Analysis of Induced Voltage and Current on Overhead Ground Wire of Huainan～Wannan～Zhebei～Huxi 1000kv UHV AC Double-Circuit Transmission Line

Fragility analysis of a long-span transmission tower–line system under wind loads

Sesismic responses of long-span transmission tower-line system

Finite Element Analysis of the Electric Fields on Suspension Insulator Strings at 500kV Power Transmission Towers

Numerical Analysis of Electric-Field Distribution Around Composite Insulator and Head of Transmission Tower

Numerical Simulation of Windage Yaw of Overhead Transmission Lines

Analysis of the seismic collapse of a high-rise power transmission tower structure

Research on transient response of tower-line system under wind field based on finite element simulation

Electric Field Distribution Calculation and Analysis of Composite Insulators Operating on Double Circuit Transposition Tower in 500kv Transmission Lines