Abstract:The process formability of incremental sheet forming (ISF) is better than the conventional forming processes. Stretching, through-thickness-shear, bending-under-tension (BUT), and compressive forces are the proposed deformation mechanisms for improved formability; however, researchers have not corroborated (on consensus) the relative significance of any one among these. Similarly, researchers observed abrupt fractures (brittle fracture) and fractures preceded by necking (ductile fracture) for different case studies, which initiated a new debate and is still unanswered. Besides, researchers have extended the ISF to energy-assisted ISF to improve the process formability further for materials having a high strength-to-weight ratio. Three prominent energy-assisted ISF are (a) Electric-assisted ISF (E-ISF) works on the principle of lowering the yield stress by raising the temperature and has shown promise for Magnesium and Titanium alloy. (b) The ultrasonic vibration-assisted (UV-ISF) process works on the principle of acoustoplastic softening effect and thus far improved the room temperature material formability while reducing the forming forces. (c) Electromagnetic-assisted ISF (EM-ISF) is a non-contact, high-speed process that utilizes the pulsed magnetic field to apply inertial force, which improves formability by dislocation slips. The EM-ISF and UV-ISF have shown promise to counter the challenges during aluminum alloy forming; however, the work in this regard is still in the initial phase and has not explored its full potential. This study updates the potential research on the current status of the energy-assisted ISF. Different customized testing equipment is discussed that help understand the process mechanism. Microstructural changes in the material occur at normal ISF and with energy-assisted ISF are discussed in detail. Discussion and future work are presented based on the insight from various articles at the end.

Investigations on the Formability of Incremental Punching Process

Analytical and Experimental Investigations on Deformation Mechanism and Fracture Behavior in Single Point Incremental Forming

An Analytical Approach for Investigation of the Incremental Sheet Forming Process

Evaluation of the Forming Limit of Incremental Sheet Forming Based on Ductile Damage

Analytical Modeling and Experimental Validation of the Forming Force in Several Typical Incremental Sheet Forming Processes

Investigation of Material Deformation Mechanism in Double Side Incremental Sheet Forming

Experimental and Finite Element Investigation of Over-Bending Phenomenon in Double-Sided Incremental Forming (DSIF) of Aluminium Sheets

Research on Sheet Metal Digital Incremental Forming Technology without Support

Formability Analysis of Electrically Assisted Double-Side Multi-Point Incremental Sheet Forming

Investigations on the deformation mechanism of a novel three-sheet incremental forming

Investigation of Shearing Extrusion Forming Process Using Finite Element Method

Investigation on A New Hole-Flanging Approach by Incremental Sheet Forming Through A Featured Tool

A review on the deformation mechanism and formability enhancement strategies in incremental sheet forming

Numerical and experimental studies for the effects of through-the-thickness shear on formability in single point incremental forming

Investigation of micro/meso sheet soft punch stamping process – simulation and experiments

Recent Development of Incremental Forming

Deformation Behavior of Curved Shells in Multi-Point Forming with Asymmetric Punches

Deformation Mechanics and Failure Mode in Stretch and Shrink Flanging by Double-Sided Incremental Forming

Investigation of the Effect of Forming Parameters in Incremental Sheet Forming Using a Micromechanics Based Damage Model

Analytical Modeling of Fracture Strain and Experimental Validation in Incremental Sheet Forming

Mechanism Investigation for the Influence of Tool Rotation and Laser Surface Texturing (LST) on Formability in Single Point Incremental Forming