Abstract:To provide a reliable design reference for the transverse concrete block,a collision stiffness calculation method based on the Kelvin model and the Hertz model was put forward in consideration of the mass of the girder and block as well as the influence of relative velocity before the collision.The theorem of kinetic energy and conservation of momentum were considered as the theoretical basis.Considering the collision effect between the main girder and the transverse concrete block during the earthquake,the influence of the initial gap size,height and thickness on the force of the pier,the cover beam and the block was analyzed.A design principle was related to controlling the shearing force of the pier and satisfying the displacement limitation of the relative displacement between the main girder and the pier.The results show that the transverse block can effectively prevent the girder dropping.With the increasing gap size of the block,the shearing force of the pier body gently decreases.Moreover,the collision effect is weakened with the decreasing slipping distance of the transition pier.The influence of the block thickness and height on the shearing force at the pier bottom is slight,but it has a great influence on the stress of the cover beam.The stress of the cover beam decreases with the increase of the thickness of the block and the decrease of the height of the block.The maximum tensile stress of the cover beam may exceed its maximum resistance stress when the block height reaches a certain value.Furthermore,the main design parameters of the block are given as follows:the initial gap size is 0.06 m;the block height can be between 0.55 m and 0.65 m;the block thickness in the range of 0.48 m to 0.58 m.Using above mentioned parameters set for the concrete block,the maximum tensile stress at the time of collision may exceed the tensile strength of concrete to crack,while there is no damage on the concrete in the compression area.Meantime the stress of the steel bar may not exceed the yield strength of the steel,which satisfies the block capacity design requirements.

Study on Inhomogeneous Collision Effect of Curved Girder Bridge under Seismic Action

Seismic Response of Isolated Railway Bridge Subjected to Near-fault Ground Motion

Seismic Damage of Long Span Steel Tower Suspension Bridge Considering Strong Aftershocks

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Uneven Distribution of Pounding Effect in a Curved Girder Bridge under Earthquake

Earthquake response of bridges bearing on flexible rubber considering pounding of girders

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Nonlinear Analysis Method for Seismic Responses Considering Pounding Between Girders of Curved Bridge with LRBs

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Effect of Component-Dropped-Collision on Structural Seismic Response

Dynamic and Mitigation Analysis of Seismic Pounding Effect on Multi-Span Highway Bridges Subjected to Spatial Earthquakes

Design of Transverse Concrete Block of Continuous Girder Bridge Considering Collision Effects

Nonlinear seismic response and damage analysis for continuous prestressed concrete rigid-frame bridge considering internal force state under near-fault ground motions

Effects of Pounding and Abutment Behavior on Seismic Response of Multi-Span Bridge Considering Abutment-Soil-Foundation-Structure Interactions

Seismic Study of an Isolated Cable-Stayed Bridge under Near-Fault Ground Motions

Evaluation of Seismic-induced Impact Interaction between a Cable-stayed Bridge and Its Approach Spans Using a Simplified Analysis Model

Transient response of bridge piers under eccentric impact of near-fault earthquake

Effects of Fault Rupture on Seismic Responses of Fault-Crossing Simply-Supported Highway Bridges

Experimental study on the seismic performance of a curved bridge via large-scale hybrid tests

Experiment on Dynamic Response of Piers Subjected to Rolling Stone Impacting

Research of pounding effect on seismic response of large span continuous rigid-frame bridge under heavy haul railway