Abstract:Noble metal catalysts face high cost and limited resources challenge. Developing a high efficiency catalyst with low noble metal loading is an important way to meet this challenge. In this study, Mg-, Ba- and Zr-doped Pd/Al2O3 catalysts with Pd loading of 0.5 wt% were prepared by stepwise wet impregnation method and used for complete oxidation of toluene. These catalysts were characterized by powder X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), CO chemisorption, hydrogen temperature-programmed reduction (H-2-TPR), temperature-programmed desorption of CO2 (CO2-TPD) and temperature-programmed desorption of oxygen (O-2-TPD). Catalytic reaction of toluene and isopropyl alcohol were carried out in a fixed bed micro-reactor under the condition of GHSV = 24,000 ml h(-1)g(cat)(-1) with 500 ppm toluene or isopropyl alcohol. The results of XRD, Raman and XPS revealed that PdO is the major species in all of the catalysts. The size of PdO remarkably decreased on MgO-doped Al2O3 surface. The results of H-2 temperature-programmed reduction and O-2 temperature-programmed desorption indicated that the reducibility of PdO and the active oxygen species were enhanced by doping basic element. In situ diffusion reflectance-infrared Fourier transform spectroscopy proved that benzaldehyde and carboxylates were the intermediate products of toluene oxidation. The results of X-ray photoelectron spectroscopy on used catalysts demonstrated that many more Pd2+ species were detected in Pd/MgO-Al2O3 sample, suggesting that a (Pd2+/Pd0) pairs was formed which is favored to the combustion of toluene. The results show that the catalytic performance of Pd/Al2O3 was promoted by modifying basic oxides in the order of Pd/MgO-Al2O3 > Pd/BaO-Al2O3 > Pd/ZrO2-Al2O3 > Pd/Al2O3. The catalytic activity of 0.5 wt% Pd/MgO (2.0 wt%)-Al2O3 was similar with that of 1.0 wt% Pd/Al2O3.

Study on gas-phase catalytic conversion of turpentine-based dipentene (TBDP) by Pd/C catalysts

Synthesis of N-(1,3-dimethylbutyl)-N'-Phenyl-p-Phenylenediamine with Diphenyl-Sulfide Modified Pd/C Catalysts

Construction of Palladium Nanoparticles Modified Covalent Triazine Frameworks towards Highly-Efficient Dehydrogenation of Dipentene for p-Cymene Production

Aqueous-phase Biphasic Dehydroaromatization of Bio-Derived Limonene into P-Cymene by Soluble Pd Nanocluster Catalysts

Converting waste tires into p-cymene through hydropyrolysis and selective gas-phase hydrogenation/dehydrogenation

Supported Nanometric Pd Hierarchical Catalysts for Efficient Toluene Removal: Catalyst Characterization and Activity Elucidation

Realization Approach of Pd-only Three-Way Catalysts with High Catalytic Performance and Thermal Stability

Selective hydrogenation of cyclopentadiene on Pb-modified Pd/Al 2O 3 catalyst

Ligand-assisted preparation of highly active and stable nanometric Pd confined catalysts for deep catalytic oxidation of toluene.

Optimization of Ni-P/APO-11 amorphous catalyst for catalytic hydrogenation of turpentine using response surface methodology

Regulating Pd/Al2o3 Catalyst By G-C3n4 Toward The Enhanced Selectivity Of Isoprene Hydrogenation

Commercial Test on Pd/C Catalyst for Purification of Terephthalic Acid

Preparation of Pd/Ce(F)-MCM-48 catalysts and their catalytic performance of n-heptane isomerization

Kinetic Study of the Direct Hydration of Turpentine

Study on Direct Hydration of Turpentine

Highly Dispersed Pd/modified-Al2O3 Catalyst on Complete Oxidation of Toluene: Role of Basic Sites and Mechanism Insight

Catalytic Dehydrogenation and Cracking of Industrial Dipentene over M/SBA-15 (M = Al, Zn) Catalysts

Study on Direct Synthesis of Diphenyl Carbonate with Heterogeneous Catalytic Reaction (V) Screening Catalysts and Optimizing Synthesis Conditions

Removal of toluene over bi-metallic Pt–Pd-SBA-15 catalysts: Kinetic and mechanistic study

Preparation of palladium‐based catalysts and use for depolymerization of larch bark tannins

Hydrotalcite-Based Bimetallic PdNi Catalysts with High Sulfur Tolerance for the Hydrogenation of Dicyclopentadiene Resin