Abstract:Zn-exchanged ZSM-5-Al2O3 (ZA) composite-supported Pt/NiMo (NM) sulfided catalysts were prepared using the conventional kneading method and were tested for dehydrocyclization-cracking of soybean oil. The effects of Zn addition on the activity and selectivity of products were investigated under moderate-pressure conditions of 0.5 and 1.0 MPa H2 in the temperature range of 420-580 °C. At the temperature 500 °C and higher, most of the sample soybean oil was converted at both the pressures of 0.5 and 1.0 MPa. At 1.0 MPa and 500 °C, the effects of Zn addition appeared and increased the yields of aromatics, while the catalyst without Zn produced larger amounts of products with more than C18. Further, at 0.5 MPa and 580 °C, the gas formation was inhibited in comparison to the cases of 1.0 MPa and the effects of the Zn addition also appeared and increased the yields of aromatics, while the catalyst without Zn produced larger amounts of products with more than C18. The Pt/NM/Zn(122)ZA test catalyst produced more than 63% of liquid fuels in the range C5-C18, and the yield of aromatics was 13%, the maximum value in the present study. The following reaction routes were proposed. The structure of triglyceride is converted by hydrocracking to three molecules of aliphatic acids and propane on the surface PtNiMo sulfide on Al2O3 support. The converted aliphatic acids are decomposed through decarboxylation to hydrocarbon fragments, which are further decomposed by cracking on the acid sites of the catalyst, the surface of NiMo sulfide, Al2O3, or ZSM-5. Finally, the formed C3 and C4 olefins are transformed to aromatics through the Diels-Alder reaction on the Zn species of ZnZSM-5. On the other hand, although gases were relatively small in amount, aromatic compounds were formed significantly, suggesting that cyclization might directly occur without conversion to gaseous hydrocarbons to some extent.

Catalytic Dehydrogenation and Cracking of Industrial Dipentene over M/SBA-15 (M = Al, Zn) Catalysts

Al-Sn Bimetallic ZSM-5: Acidity Regulation and Excellent Performance in Cracking N-Hexane for Production of Light Olefins

Synergetic Regulation of the Microstructure and Acidity of HZSM-5/MCM-41 for Efficient Catalytic Cracking of n-Decane

Dual Effects of Zinc Species on Active Sites in Bifunctional Composite Catalysts Zr/H[Zn]ZSM-5 for Alkylation of Benzene with Syngas

Catalytic Cracking of Supercritical N-Dodecane over Meso-Hzsm-5@al-mcm-41 Zeolites

Insight into catalytic cracking pathways of n‐pentane over bifunctional catalysts to produce light olefins

Influence of Operating Conditions, Si/Al Ratio and Doping of Zinc on Pt-Sn/ZSM-5 Catalyst for Propane Dehydrogenation to Propene

Isomorphously Substituted [Fe,Al]ZSM-5 Catalysts for Methane Dehydroaromatization

Effects of Zn Addition into ZSM-5 Zeolite on Dehydrocyclization-Cracking of Soybean Oil Using Hierarchical Zeolite-Al2O3 Composite-Supported Pt/NiMo Sulfided Catalysts

Catalytic Cracking of Tricyclo [5.2.1.02.6] Decane over HZSM-5 Molecular Sieves

Catalytic Cracking of Fatty Acid Methyl Esters for the Production of Green Aromatics Using Zn-Modified HZSM-5 Catalysts

High Activity in Catalytic Cracking over Stable Mesoporous Aluminosilicates

HZSM-5/MCM-41 composite molecular sieves for the catalytic cracking of endothermic hydrocarbon fuels: nano-ZSM-5 zeolites as the source

Dehydrogenation–cracking synergistic pathway of n –pentane by core–shell MFI zeolite to produce light olefins

Synthesis and Performance of Pillared HZSM-5 Nanosheet Zeolites for N-Decane Catalytic Cracking to Produce Light Olefins

Effect of Si/Al ratio on performance of Pt–Sn-based catalyst supported on ZSM-5 zeolite for n-butane conversion to light olefins

Influence of Catalyst Acidity on Dealkylation, Isomerization and Alkylation in Mta Process

Hydrocracking of Heavy Oil Using Zeolites Y/Al-SBA-15 Composites As Catalyst Supports

Light Alkane (mixed Feed) Selective Dehydrogenation Using Bi-Metallic Zeolite Supported Catalyst

Transition metal modified hierarchical ZSM-5 nanosheet for catalytic cracking of n -pentane to light olefins

Mesoporous Materials from Zeolite Seeds As Supports for Nickel–tungsten Sulfide Active Phasespart 2. Catalytic Properties for Deep Hydrodesulfurization Reactions