Abstract:Commercial fiber Bragg grating (FBG) sensors typically rely on require plastics, acrylates or glues for encapsulation and adhesion, making them susceptible to aging, creep, and high-temperature intolerance. To overcome these issues, this study introduces an electrochemical deposition process aimed at creating adhesive-free sensors by embedding FBGs into metal structures. This approach enhances the operational range and lifespan of the sensor. The embedding method facilitates the detection of bending strains by the FBG. Consequently, a temperature-insensitive inclination sensor is designed and fabricated. Two FBGs are embedded on either side of a metal strip, precisely aligned with its central axis, to measure bending strain. When bending stress is applied to the metal steel, the two FBGs experience opposite strains, causing their central wavelengths to drift in opposite directions. Analyzing the wavelength shift difference between the two FBGs yields a sensor with higher inclination sensitivity and temperature insensitivity. The experimental results indicate that the designed sensor has a high sensitivity of 42.76 pm/°, resolution of 0.0023°, and linearity of 0.9994. Temperature-response tests demonstrate the excellent temperature insensitivity of the fabricated sensor, allowing for reliable operation in high-temperature conditions. Furthermore, this metal encapsulation method exhibits significant potential for expanding the applications of FBGs.

Temperature Sensing Experiment of Fiber Bragg Grating Packaged by Copper Capillary Without Strain

Fiber Bragg Grating Packaged Temperature Sensor Without Exterior Load Affection

Study on the Strain and Temperature Densing Characterist ics of FBG Packaged by the Copper slice

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Temperature Sensing of Metal-Coated Fiber Bragg Grating

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Passive Temperature Compensation Package For Fiber Bragg Grating

Capillary Encapsulating of Fiber Bragg Grating and the Associated Sensing Model

Non-Gel Encapsulation Process of a High Temperature Strain Fiber Bragg Grating Sensor and Its Sensing Properties

Highly-sensitive Fiber Bragg Grating Temperature Sensors with Metallic Coatings

Strain Sensing Measurement Technology For Fiber Bragg Grating With Holder Type Temperature Self-Compensation

Fiber Bragg grating temperature sensor for marine application

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Experimental Measurements of the Sensitivity of Fiber-Optic Bragg Grating Sensors with A Soft Polymeric Coating under Mechanical Loading, Thermal and Magnetic under Cryogenic Conditions

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

A Temperature Compensation Method for Fiber Bragg Gratings Using Negative Thermal Expansive β-Eucryptite Packaging

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Study on Experiment of Fiber Bragg Grating Pressure Sensitivity

Temperature-Insensitive Embedded Metal-Packaged Fiber Bragg Grating Inclination Sensor