Abstract:A microchannel reactor with a porous surface catalyst support has been applied to methanol steam reforming (MSR) for hydrogen production. The fluid flow, heat transfer, and hydrogen production efficiency of the microchannel reactor are significantly affected by the fabricated porous surface support, such as the pore sizes and their distributions. This paper presents a novel microchannel reactor with a gradient porous surface as the reaction substrate to enhance the performance of the microreactor for hydrogen production. Numerical modeling of the gradient porous surface is developed based on fractal geometry, and three different types of porous surfaces as the catalyst supports (two gradient porous surfaces and one uniform pore-size surface) are investigated. The fluid flow and heat transfer characteristics of these three types of microchannel reactors are studied numerically, and the results showed that the microreactor with a positive gradient pore sized surface exhibited relatively better overall performance. Experimental setups and tests were performed and the results validate that the microchannel reactor with a positive gradient porous surface can increase the heat transfer performance by up to 18% and can decrease the pressure drop by up to 8% when compared to a microreactor with a uniform pore sized surface. Hydrogen production experiments demonstrated that the microreactor with positive gradient pore sizes has the highest methanol conversion rate of 56.3%, and this rate is determined to be 6% and 9% higher than that of microreactors with reverse gradient porous surfaces and uniform pore sized surface, respectively.

Simulation of Methanol Steam Reforming Heated by Waste Heat for Hydrogen Production in a Microreactor

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

Performance Study on Methanol Steam Reforming Rib Micro-Reactor with Waste Heat Recovery

Simulation and enhancement of axial temperature distribution in a reactor filled with in-situ electrically heated structured catalyst

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Computational modelling of methanol autothermal reforming phenomena in microchannel reactors for hydrogen production

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

CFD simulation of methane steam reforming in a membrane reactor: Performance characteristics over range of operating window

Measurement of Reaction Temperature Distribution Inside of Methanol Steam Reforming Microreactor Using Infrared Thermography

CFD Simulation of Hydrogen Generation and Methane Combustion Inside a Water Splitting Membrane Reactor

Thermal matching characteristics in an autothermal methanol reforming microchannel reactor for hydrogen production

Design and optimization of reforming hydrogen production reaction system for automobile fuel cell