Abstract:As a significant p(-)type semiconductor, NiO is widely studied for its gas sensing and electrochromism characteristics, whereas researches concerning its photodetection properties are rarely reported. Herein, we fabricated a photodetector based on NiO/Bi2Te3 heterostructure and studied the influence of NiO' s concentrations as well as the Localized Surface Plasmon Resonance (LSPR) effect of the Au NPs on the device's photoresponse. For the device fabrication, NiO film was spin-coated on the FTO glass, followed by baking and annealing to form high quality crystal film. Then, Chemical Vapor Deposition (CVD) method was adopted to lay Bi(2)Te(3 )nanoplates on the NiO film, forming the NiO-Bi2Te3 heterostructure. Finally, the device was achieved via photolithographic process and Ag electrodes deposition, featuring a vertical structure with FTO working as the anode and Ag serving as the cathode. X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM) results demonstrate the favorable crystal quality of NiO film and Bi2Te3 nanoplates. Energy Dispersive Spectrometer ( EDS) image manifests the uniform distribution of different elements and Photoluminescence (PL) spectra were applied to study the mechanism of electron-hole separation. All these results could be condensed to the point that the NiO film with the concentration of 0.5 mol/L shows the optimal crystal quality and the doping of Au NPs aids the separation of electron-hole pairs. Furthermore, we also performed photo-electric tests to evaluate the influence of the NiO concentration and the results show that the device achieves optimal response with the concentration of NiO fixed at 0.5 mol/L, which meshes well with the characterizing results. In addition, tests regarding photoresponse to wavelength, power density and on/off switching were conducted in ambient environment. With the presence of Au NPs, the maximum responsivity (R) of the device reaches 1236 mA/W , about 21% higher compared to that of the pristine Nit, owing to the boosted light absorption caused by the LSPR effect of Au NPs. To elucidate the weak signal detecting ability, the specific detectivity (D") of the device is calculated and it attains the value of 5.97X10(10) Jones. Besides, the photo gain exceeds 400% , indicating that there are more than 4 photoexcited carriers generated by per absorbed photon. Beyond that, the formation of Schottky contact between NiO and Au NPs will facilitate the separation of electron-hole pairs, thus accelerating the response process and shrinking the rise time (T-r) and decay time (T-d) to 92 ms and 62 ms, respectively. The study corroborates the enhancement of photoresponse resulted from the two internal electrical field due to the introduction of NiO/Bi2Te3 junction and Au/NiO Schottky junction as well as the LSPR effect from Au NPs. This research offers a feasible approach for the realization of NiO-based photodetector and sheds light on the enormous potential of the NiO's application in photodetection.

High‐Performance NiCo2O4 Nanofilm Photodetectors Fabricated by an Interfacial Self‐Assembly Strategy

ZnO Hollow-Sphere Nanofilm-Based High-Performance and Low-Cost Photodetector.

General Fabrication of Monolayer SnO2 Nanonets for High‐Performance Ultraviolet Photodetectors

ZnO@NiO Core-Shell Heterojunction Photoanode Modified with NiOOH Co-Catalyst for High-Performance Self-Powered Photoelectrochemical-Type UV Photodetector

Fast-response Self-Powered Flexible Transparent Ultraviolet Photodetectors Based on a CuO/ZnO Nanowire Array Heterojunction

High photodetectivity of low-voltage flexible photodetectors assembled with hybrid aligned nanowire arrays

Fast and High-Performance Self-Powered Photodetector Based on the ZnO/Metal-Organic Framework Heterojunction

From Nanofibers to Ordered ZnO/NiO Heterojunction Arrays for Self-Powered and Transparent UV Photodetectors

A high performance self-powered heterojunction photodetector based on NiO nanosheets on an n-Si (1 0 0) modified substrate

A tin oxide/silicon heterojunction with a nano litchi shell structure for ultrafast, high-detectivity, self-powered broadband photodetectors

High Performance Cu2O Film/zno Nanowires Self-Powered Photodetector by Electrochemical Deposition*

High Performance Charge-Transfer Induced Homojunction Photodetector Based on Ultrathin ZnO Nanosheet

SnO2-microtube-assembled cloth for fully flexible self-powered photodetector nanosystems.

Self-Powered p-NiO/n-ZnO Heterojunction Ultraviolet Photodetector Based on Honeycomb Nano-Mesh Structure

Stacking-order-dependent optoelectronic properties of bilayer nanofilm photodetectors made from hollow ZnS and ZnO microspheres.

Oil–water Interfacial Self-Assembly of PS/ZnS Nanospheres and Photoconducting Property of Corresponding Nanofilm

Self-Powered Narrowband P-Nio/N-Zno Nanowire Ultraviolet Photodetector With Interface Modification Of Al2o3

Self-Powered Lithium Niobate Thin-Film Photodetectors.

Fabrication and Photoresponse Study of the Photodetector Based on Novel NiO-Bi(2)Te(3 )Heterostructure

Facile Fabrication of UV Photodetectors Using Spin-Coating Flame-Synthesized ZnO Nanoparticles

High-performance flexible UV photodetector based on self-supporting ZnO nano-networks fabricated by substrate-free chemical vapor deposition