Abstract:The possible fracture process of interior texture and its reinforcing mechanism to properties. Polyacrylonitrile (PAN)‐based precursor fibers with different mechanical properties prepared by wet‐spinning and its correlation with microstructure was researched, the primary structural factors that affecting its properties were analyzed. The tensile strength and modulus of precursor fibers increased from 4.63 cN/dtex to 9.16 cN/dtex and 99.09 cN/dtex to 168.92 cN/dtex, respectively, with the increase in crystallinity from 69.29% to 87.84% and orientation degree increased from 83.95% to 93.81%, high performance precursor fibers could be achieved by decrease in the crystallite size and interlayer spacing, these aggregation structure plays a decisive role to the mechanical properties of fibers. The integrality of aggregation structure and properties could reflected by boiling water shrinkage behavior and glass transition temperature from the side. The fracture morphology of fibers with different properties were studied by scanning electron microscope (SEM) and three fracture characteristics were observed, PF1 and PF3 presented the radial extended fracture without microfibril pull out, radial cluster fracture with the pull out of microfibril for PF2, PF4–PF6, together with the axial splitting pattern in PF6, which was revealed by microfibrils/fibrils in longitudinal and transverse combined with solution etching. Precursor fibers with less voids, without serious skin‐core, continuous arrangement, tightly stacked, well‐developed and complete oriented microfibrils/fibrils, exhibited excellent mechanical properties. Possible fracture process was given from the perspective of aggregation structure and microfibrils/fibrils, which become dominant factors determining properties of precursor fibers. Improve the performance could be achieved by regulating surface structure and cross‐sectional shape. As one of the main structural factors that determining properties, by reducing diameter could minimize the numbers and sizes of defects.

Relationship Between Technics and Properties During PAN Precursors Formation Process

Microstructural Evolution during Dry-Jet Wet Spinning Postprocessing from Coagulation Bath Fiber to High-Performance Polyacrylonitrile Precursor Fiber

Comprehensive research on the correlation between microstructure and mechanical properties of polyacrylonitrile‐based precursor fibers prepared by wet‐spinning

Structural Transformation of Polyacrylonitrile (PAN) Fibers during Rapid Thermal Pretreatment in Nitrogen Atmosphere

New Insights into Orientation Differences Between Skin and Core Regions of Polyacrylonitrile Fibers During Pre-Stabilization with the Stretching Process

PREPARATION OF POROUS POLYACRYLONITRILE ULTRATHIN FIBERS BY ELECTROSPINNING WITH NONSOLVENT INDUCED PHASE SEPARATION

In Situ Study and Improvement of the Temperature Increase and Isothermal Retention Stages in the Polyacrylonitrile (PAN) Fiber Pre-Oxidation Process

Plastic deformation of the microfibrils in wet polyacrylonitrile fibers induced by the stretching field

Evolution and Regulation of Radial Structure of PAN Pre-Oxidized Fiber Based on the Fine Denier Model

Study on the Changes of Structures and Properties of PAN Fibers during the Cyclic Reaction in Supercritical Carbon Dioxide

Chemical Structure Evolution and Mechanism During Pre-Carbonization of PAN-based Stabilized Fiber in the Temperature Range of 350–600 °C

Effect of Coagulation Conditions on the Radial Moduli of Polyacrylonitrile Nascent Fibers

Effect of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers

Characterization Of Pan/Pani-Dbsa Blend Nanofibers Produced By Electrospinning Method

Effects of KBrO3 on Chemical, Aggregation and Morphological Structure of Polyacrylonitrile (PAN) Precursor Fibers

Radiation assisted pre-oxidation of polyacrylonitrile fiber: Graphite formation and lower crystal size revealed by 2D WAXD at a synchrotron facility

Heterogeneous microstructure of γ-irradiated pre-oxidized PAN fiber revealed by microfocus SR-SAXS reconstruction and molecular simulation

Study on BC/PAN Blending Nanofibers by Elecrtospinning

Effect of oxygen content on the preoxidation structure of polyacrylonitrile fibers

The micro-void structure transformation and properties assessment of polyacrylonitrile fibers irradiated by electron-beam as carbon fiber precursor

Improving the Physical Properties of Nanofibers Prepared by Electrospinning from Polyvinyl Chloride and Polyacrylonitrile at Low Concentrations