Abstract:We describe a quasi-distributed optical fiber strain sensor, whose principle of operation is based on the coherent frequency-modulated continuous-wave (FMCW) reflectometry technique. The sensing system is basically composed of a laser diode, which is frequency swept by a triangle waveform injection current and an unbalanced two-beam interferometer. Its test arm consists of a number of single-mode fibers, which act as sensing fibers, with a mirror at the far end and mechanical splices as the connectors as well as the reflectors. Theoretical analysis shows that the measuring resolution of the strain is inversely proportional to the length of the sensing fiber. To measure the strain variation of each sensing fiber, the phase shifts of the beat signals are demodulated by a heterodyne signal processing system. The requirement of a high precision temperature control of light source can be eliminated in this way, since temperature effect is insignificant to the phase demodulation technique. To calibrate and verify the linearity, feasibility, and accuracy of this system, tensile and bending tests were carried out and strain gauge was employed as the benchmarking tool over the experimental results. It was observed that this system is feasible and its accuracy is excellent. © 2002 Society of Photo-Optical Instrumentation Engineers.

An Active Strain Sensing System Based on Single‐longitudinal‐mode Distributed Bragg Reflector Fiber Laser and Its Applications in the Measurement of Erbium‐doped Fiber Birefringence

Multilongitudinal Mode Fiber Laser for Strain Measurement

Strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity

A dual-wavelength erbium-doped fiber laser for high resolution strain sensing with compound filter of a Sagnac loop and a long period fiber grating

Fiber Ring Laser Based on SMF–TCF–SMF Structure for Strain and Refractive Index Sensing

Investigation of Axial Strain Effects on Microwave Signals from a PM-EDF Short Cavity DBR Laser for Sensing Applications

Highly Sensitive Bending Sensor Based on Er^3+-doped DBR Fiber Laser

Research on strain sensing based on passively mode-locked fiber laser using saturable absorber

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

Highly sensitive bending sensor based on Er3+-doped DBR fiber laser

Bragg grating tuned fiber laser system for measurement of wider range temperature and strain

High-Resolution Strain Fiber Laser-Sensor Based on Core-Offset Mach-Zehnder Interferometer

High-Resolution Strain and Temperature Sensor Based on Distributed Bragg Reflector Fiber Laser

Quasi-distributed frequency-modulated continuous-wave reflectometric optical fiber strain sensor

Ultra-short cavity distributed bragg reflector Er-doped fiber laser for temperature-insensitive bending measurement

A novel active continuous-wave FLRD strain sensor based on frequency-shifted interferometry

Bending-Loss-Resistant Distributed Temperature and Strain Discriminative Brillouin Sensor Based on 98 mol% Germania-Doped Few-Mode Fiber

Distributed optical fiber sensing based on the combination of Brillouin and Rayleigh scattering

Wide Range of Temperature and Strain Measurement Using Bragg Grating Based Fibre Laser Approach