Abstract:This study delves into the influence of laser welding parameters on the microstructural evolution, surface roughness, and hardness of dissimilar lap joints formed by welding 340BH steel (upper) to cold-rolled pure vanadium (bottom) in an attempt to successfully develop metal membranes by adopting a novel technological route. Specifically, we examined power levels of 0.3 kW and 0.4 kW combined with varying welding speeds (40 mm/s, 50 mm/s, and 60 mm/s). The results indicate that defect-free joints were achievable at the higher welding speed of 60 mm/s. This conclusion is supported by the observed surface roughness profile. Elemental interdiffusion and temperature play pivotal roles in the formation of these dissimilar joints. These factors determine the dimensions of the heat-affected zone (HAZ) and the fusion zone (FZ) under all welding conditions. Notably, the high cooling rates during laser welding hindered the formation of intermetallic phases both in the FZ and at the interface between the metals. Microstructural examination of the HAZ/FZ on the Fe side showed a coarser microstructure when using a power of 0.4 kW, in contrast to the lath martensite observed at 0.3 kW. These observations align with the cooling curve derived from finite element analysis (FEA). FEA was also used to estimate temperature profiles throughout the welded area, and the results were consistent with experimental data. Further microstructural analysis using electron backscattered diffraction (EBSD) revealed a significant phenomenon: the formation of recrystallized grains of vanadium in the HAZ near the FZ on the vanadium side. Microhardness tests, conducted to gauge joint quality, displayed varying hardness levels across the base metal (BM), HAZ, and FZ interfaces. At a power of 0.3 kW, the HAZ displayed greater hardness than the FZ and BM due to the formation of lath martensite. Conversely, at a power setting of 0.4 kW, a reduction in hardness was observed within the HAZ, attributable to coarser ferrite formation.

The Application of Laser Welding on Left Ventricular Assist Device (LVAD)

Application of Nd:YAG Laser Welding to Implantable Neuro-Stimulator

A comprehensive assessment of laser welding of biomedical devices and implant materials: recent research, development and applications

Laser assisted vascular welding with real time temperature control

Assessment of mechanical and biocompatible performance of ultra-large nitinol endovascular devices fabricated via a low-energy laser joining process

Laser Assisted Welding of Gold Nanowires

Left ventricular assist devices: A historical perspective at the intersection of medicine and engineering

Underwater Laser Welding/Cladding for High-performance Repair of Marine Metal Materials: A Review

Effect of welding parameters on weld surface roughness, hardness, and microstructure in laser-welded 340BH-steel and pure vanadium

Microstructure and Mechanical Properties of Selective Laser Melting 316L/R-316L Butt Joint Welded by Laser Welding

Follow-up ultrasonic vibration assisted laser welding dissimilar metals for nuclear reactor pump can end sealing

Laser Welding of AISI 316L Stainless Steel Produced by Additive Manufacturing or by Conventional Processes

High-Performance Self-Expanding NiTi Stents Manufactured by Laser Powder Bed Fusion

Microstructure, Mechanical Properties and Corrosion Performance of Laser-Welded NiTi Shape Memory Alloy in Simulated Body Fluid

The Characteristics of Laser Welding of a Thin Aluminum Tab and Steel Battery Case for Lithium-Ion Battery

Improving hydraulic performance of the left atrial assist device using computational fluid dynamics

A Comparable Study on Laser Welding Behaviors of Selective Laser Melted 304 Stainless Steel, Inconel 718 Superalloy and Ti-6Al-4V Alloy

Interventional Microbubble Enhanced Sonothrombolysis on Left Ventricular Assist Devices

Left Ventricular Assist Device in Advanced Refractory Heart Failure: A Comprehensive Review of Patient Selection, Surgical Approaches, Complications and Future Perspectives

Durable left ventricular assist devices: a contemporary review of their benefits and drawbacks

Crossed-Wire Laser Microwelding of Pt-10 Pct Ir to 316 Low-Carbon Vacuum Melted Stainless Steel: Part I. Mechanism of Joint Formation