Abstract:The sliding of laminated rubber bearings (LRBs) and failure of shear keys observed in the Wenchuan earthquake significantly increase the span collapse risk of simply-supported highway bridges and contradict the ductile design philosophy recommended by the current design code in China. In the meantime, the seismic damage mode of bridges may also change with increasing service time due to environmental corrosion sustained by the ductile element of pier. It is well accepted that the change of bridge damage mode will cause the ineffectiveness of original seismic design. In order to identify transverse seismic damage modes of deteriorating simply-supported bridges, a five-span bridge is selected as the baseline bridge and a series of time-dependent models considering the chloride intrusion are developed. A methodology for identifying the seismic damage mode of the bridge system is proposed. Incremental dynamic analyses (IDAs) are performed to study the effects of service time and shear key capacity on seismic damage modes of the baseline bridge. To validate the results obtained from the baseline bridge, comparisons of the lifetime damage modes for several typical bridge configurations are conducted through the proposed methodology. The results indicate that with the increase of the service time of bridge, the displacement response of LRBs decreases slightly while the displacement ductility response of piers increases significantly under earthquakes, and the seismic damage mode of the bridge shows a trend of changing from displacement-oriented to strength-oriented or combined damage modes. On the other hand, the increase of shear key capacity can effectively prevent excessive girder movement but intensifies the damage level of piers under earthquakes, which is in accordance with the expectations of the ductile design philosophy. In conclusion, the combined effects of environmental corrosion and shear key capacity can significantly change the seismic damage modes of bridges along the transverse direction and thus should be considered carefully during the seismic design.

Research Review of Seismic Failure Mode of Abutment and Influence on Deck Fall-Off

Earthquake Response of Bridge Restrainers Considering Failure of Bearings

Seismic Damage of Long Span Steel Tower Suspension Bridge Considering Strong Aftershocks

Residual seismic performance of steel bridges under earthquake sequence

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Study on Ultra‐low Cycle Fatigue Fracture of Thick‐walled Steel Bridge Piers

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Fragility analysis and assessment of large-span beam string-structures

Analysis Of Seismic Response Of Integral Bridge Abutments

Problems in Chinese Highway Bridge Seismic Specifications and Suggestions for Improvement

Effects of Pounding and Abutment Behavior on Seismic Response of Multi-Span Bridge Considering Abutment-Soil-Foundation-Structure Interactions

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Review on seismic resilient bridge structures

Transverse seismic damage mode identification of deteriorating simply-supported highway bridges

Field Investigation and Numerical Analysis of Damage to a High-pier Long-span Continuous Rigid Frame Bridge in the 2008 Wenchuan Earthquake

Response of full-height frame integral abutments subjected to seismic motions

Seismic vulnerability analysis of continuous beam bridge based on finite element Method

A nonlinear static analysis for the seismic design of single-span integral abutment bridges

Experimental Research and Finite Element Analysis of Bridge Piers Failed in Flexure-Shear Modes