Abstract:Integral bridges have been proposed as a jointless design alternative to the traditional counterparts, possessing copious potential economic and structural advantages. However, due to the monolithic connection at the girder-abutment interface, longitudinal deformations from the superstructure must now be accommodated by the stiffness of the approach backfill and soil surrounding the foundation. Consequently, in addition to traffic loads, integral bridge approaches are subjected to long-term, cyclic loading due to diurnal and seasonal thermal variations. This has resulted in two progressive geotechnical phenomena: an escalation of lateral passive pressures at the abutment-soil interface and accumulated deformations near the bridge approach. Over the last two decades, several investigations on the approach backfill-abutment interaction have been carried out. However, previous reviews on integral bridges have not comprehensively discussed the theoretical aspects of these two complex geotechnical issues. Hence, this paper presents a discussion on the long-term response of stress ratcheting observed from controlled analyses, along with a comparison to that from field monitoring data. Subsequently, the occurrence of accumulated deformations, along with a correlation to the mechanism of the cyclic interaction is explored. The effects of foundation design choice and skew angle on the passive pressure accumulation and soil deformation behavior are then presented. Subsequently, approaches used to mitigate the effects of the backfill-abutment interaction are compared. From this review, it is apparent that outcomes based on available experimental and field investigations are yet inadequate to develop analytical models required to predict the long-term response of integral bridge approach backfills under various loading conditions.

Analysis Of Seismic Response Of Integral Bridge Abutments

Response of full-height frame integral abutments subjected to seismic motions

Earthquake Response of Bridge Restrainers Considering Failure of Bearings

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Seismic Damage of Long Span Steel Tower Suspension Bridge Considering Strong Aftershocks

Dynamic Response of Bridge Approach Treated with Deep-Seated Concrete Slab

Numerical Analysis of the Embedded Abutments of Integral Bridges

Effects of Pounding and Abutment Behavior on Seismic Response of Multi-Span Bridge Considering Abutment-Soil-Foundation-Structure Interactions

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

A nonlinear static analysis for the seismic design of single-span integral abutment bridges

Seismic Characteristics of Integral Abutment Bridge with Rigid-Flexible Combined Abutment Based on Shaking Table Model Test

Subsoil stiffness effects on the bridge-abutment dynamic behaviour

Laboratory study of the behavior of granular soils behind integral bridge abutments

Predicting the Earth Pressure on Integral Bridge Abutments

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

A review of soil deformation and lateral pressure ratcheting phenomena in integral abutment bridges

Seismic analysis of integral bridge considering the influence of soil structure interaction

Research Review of Seismic Failure Mode of Abutment and Influence on Deck Fall-Off