Abstract:The interfacial adhesion and viscoelasticity of an additional mass layer have a significant influence on the resonant frequency of a quartz crystal microbalance (QCM), especially when the attached mass layer is thick. In this study, a detailed quantitative investigation is conducted on the influence of the interface parameter and viscosity coefficient on the resonant frequency and admittance of a QCM. The obtained explicit expression of free vibration of the QCM can be numerically solved using Muller’s method. The results obtained in this study show that the viscoelasticity of the mass layer and its bonding characteristics significantly affect the performances of the QCM, such as the resonance frequency, displacement, and stress distributions, and the peak and bandwidth of admittance. The non-proportional relation between the resonance frequency and thickness of the mass layer becomes obvious when the thickness of the mass layer is larger than 2% that of the quartz plate. Meanwhile, the error between the exact solution and Sauerbrey’s solution is enlarged as the interface parameter increases or the viscosity coefficient decreases. The proposed method will be more precise in solving the resonant frequency than Sauerbrey’s equation does and able to provide a guidance for determining the viscosity of an attached mass layer. The novel points in the article are as follows: (i) The effects of the imperfect interface and viscosity on the resonance frequency of a QCM at different layer thicknesses are investigated. (ii) The difference between effects of the imperfect interface and viscosity on the characteristics of the admittance is discussed in detail.

The Antiplane Vibration of Mass Sensor with an Inhomogeneous Weak Interface

The Anti-Plane Vibration of Quartz Plate with an Additional Partial Non-Uniform Mass Layer

The Anti-Plane Vibration of a Quartz Plate with an Additional Partial Non-Uniform Mass Layer for Acoustic Wave Sensing

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

Effect of an Imperfect Interface in A Quartz Crystal Microbalance for Detecting the Properties of an Additional Porous Layer

Surface Roughness Effects on the Vibration Characteristics of AT-Cut Quartz Crystal Plate

Effects of the Imperfect Interface and Viscoelastic Loading on Vibration Characteristics of a Quartz Crystal Microbalance

FREE VIBRATION OF MULTI-LAYERED PIEZOELECTRIC SPHERICAL SHELLS WITH IMPERFECT INTERFACES

Bulk wave propagation in layered piezomagnetic/piezoelectric plates with initial stresses or interface imperfections

The investigation of trapped thickness shear modes in a contoured AT-cut quartz plate using the power series expansion technique

Anti-plane Shear Crack Normal to and Terminating at the Interface of Two Bonded Piezoelectric Ceramics

Analysis of an Interface Crack between Piezoelectric Semiconductor Coating and Elastic Substrate Structure

In-plane Vibration of Rectangular Plates with Periodic Inhomogeneity: Natural Frequencies and Their Adjustment

Interface crack problems of a laminated piezoelectric plate

The Character of a Piezoelectric Layer Bonded to an Elastic Substrate under Static Anti-Plane Electromechanical Impacts

Exact solution for mixed boundary value problems at anisotropic piezoelectric bimaterial interface and unification of various interface defects

In-Plane Vibrations of Elastic Lattice Plates and Their Continuous Approximations

Bending and vibration of one-dimensional hexagonal quasicrystal layered plates with imperfect interface

Correction factors of the Mindlin plate equations with the consideration of electrodes.

Propagation of Thickness-Twist Waves in an Inhomogeneous Piezoelectric Plate with an Imperfectly Bonded Interface

Analysis of Flexural Vibrations of a Piezoelectric Semiconductor Nanoplate Driven by a Time-Harmonic Force