Abstract:Pulsed power systems can deliver high peak power in a micro/nano-second timescale to various loads in scientific and industrial applications, whose performances are significantly influenced by the pulsed discharge switch. This article presents the development and comprehensive tests of a miniaturized sealed-off pseudospark switch. The structure of double-gap and multi-channel is adopted to achieve the high hold-off voltage and high current capacity. In single pulse tests, the influence of pressure in the switch is analyzed. As the pressure increases, values of multiple parameters decrease, like self-breakdown voltage, trigger delay, and voltage dropping time. In a wide pressure range, trigger jitter is below 3 ns, and the minimum is <1 ns. At low pressure, the transient voltage across two gaps becomes inconsistent, and two types of current quenching are observed, which are related to processes occurring on cathode surface. In repetitive pulse tests, the direct repetitive operation is up to 3.5 kHz while higher repetition rate is limited by the trigger system. In double-pulse tests, the maximum repetition rate can be higher than 8 kHz for 40 kV pulsed voltage. Meanwhile, the insulation recovery speed is higher at lower pressure, and as the time delay between two pulses increases, the second pulse breakdown voltage increases nonlinearly. In high current tests, the switch is also used in metal wire explosion experiments and operates at the condition of 30 kV/40 kA for more than 104 shots without performance degradation. Further lifetime tests point out that the switch can work for >106 shots stably at moderate current. Experiments prove that the designed switch has superior performances including high hold-off voltage (>50 kV), low jitter (<1 ns), high repetition rate (>3.5 kHz), high peak current (>40 kA), long lifetime (>106 shots) and miniaturized size.

A Planar Micro Spark Gap Switch with a Triggering Electrode

Design, Simulation, and Characterization of a Low-Cost In-Plane Spark Gap Microswitch with Dual-Trigger Electrode for Pulsed Power Applications.

Multiple-Gap Spark Gap Switch

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Design and fabrication of micro planar gas spark switch

A high-energy graphite spark gap switch

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium- and low-voltage pulse power systems

Design, Fabrication, and Characterization of a Planar Three-Electrode Trigger Switch Based on Flexible Printed Circuit Process

A High-Energy Spark Gap Switch and Trigger System

Development of P-C Switch with Adjustable Gap

Experimental Study of the Multi-Gap Multi-Channel Gas Spark Closing Switch

A Miniaturized Sealed-Off Double-Gap Pseudospark Switch for High Power and High Repetition Rate Pulsed Discharge Applications

High Current Operation of a Semi-Insulating Gallium Arsenide Photoconductive Semiconductor Switch Triggered by the Light Produced by a Spark Gap

A Multi-Gap Multi-Channel Gas Switch for the Linear Transformer Driver

A Three-Electrode Gas Switch Triggered by Microhollow Cathode Discharge with Low Trigger Voltage

Study on A Planar Multi-Gap Multi-Channel Gas Switch

Comparative Study of Pulsed Breakdown Processes and Mechanisms in Self-Triggered Four-Electrode Pre-Ionized Switches

Metal foil gap switch and its electrical properties

Research on fuze microswitch based on corona discharge effect