Abstract:Graphene has attracted a lot of attention because of its unique mechanical, thermal, electrical and optical properties. In this study, a double layered structured photoanode consisting of a graphene/TiO2 composite layer and a TiO2 nanoparticles (P25) underlayer was developed. The photoelectric properties of as-prepared double layer structured photoanode were studied with comparison of the anatase TiO2 photoanode. Graphene was prepared by reduction of graphene oxide (GO) under a hydrothermal conditions and graphenen/TiO2 composite semiconductor materials were prepared by mixing graphene into TiO2 paste. The effect of graphene contents in graphene/TiO2 composite layer was also investigated. After constructing double layer photoanode with proper amount of graphene, the photoanode displayed enhanced light and dye adsorption properties with higher light harvesting efficiency, lower internal resistances, faster electron transport and lower charge recombination rate, which resulted in high current density. At the optimum conditions, the DSSC exhibited a J(sc) of 15.01 mA cm(-2), a V-oc of 0.72 V, and a FF of 0.66 with the energy conversion efficiency (eta) of 7.08%, indicating a increase in J(sc) and eta respectively than that of DSSC based on pure TiO2 photoanode, which gives a Jsc of 13.25 mA cm(-2), a Voc of 0.73 V, and a FF of 0.62 with a eta of 5.94%. However, the addition of excess graphene in the composite layer led to the enhancement of charge recombination, the reduction of dye adsorption and the decrease of photoelectric conversion efficiency of DSSCs. The graphene/TiO2 composite layer in DSSCs could really enhance its efficiency after the amount of graphene was successfully optimized.

High-quality GS/TiO2 composite for the photoanode of the dye-sensitized solar cells

Enhanced Performance of the Dye-Sensitized Solar Cells by the Introduction of Graphene Oxide into the TiO2photoanode

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Enhanced Performance of Dye Sensitized Solar Cells by Using a Reduced Graphene Oxide/tio 2 Blocking Layer in the Photoanode

Effect of Graphene/TiO₂ Composite Layer on the Performance of Dye-Sensitized Solar Cells.

An Investigation on the Photoelectrochemical Properties of Dye-Sensitized Solar Cells Based on Graphene–tio2 Composite Photoanodes

Two kinds of graphene-based composites for photoanode applying in dye-sensitized solar cell

Enhanced Dye-Sensitized Solar Cell Using Graphene-Tio2 Photoanode Prepared By Heterogeneous Coagulation

Hierarchical Titania Mesoporous Sphere/Graphene Composite, Synthesis And Application As Photoanode In Dye Sensitized Solar Cells

Improved Performance of DSSC Photoanodes After the Modification of TiO2 with Reduced Graphene Oxide

Highly transparent graphene oxide composited TiO2 thin film as efficient photoanode for dye-sensitized solar cells

Enhanced photovoltaic performance of a dye-sensitized solar cell using graphene-TiO2 photoanode prepared by a novel in situ simultaneous reduction-hydrolysis technique.

Porous Activated Graphene Nanoplatelets Incorporated In Tio2 Photoanodes For High-Efficiency Dye-Sensitized Solar Cells

Synthesis of titanium dioxide nanorods combining with titanium dioxide nanoparticles/reduced graphene oxide nanocomposite for fabrication of photoanodes in dye–sensitized solar cells

Synthesis of titanium dioxide/reduced graphene oxide nanocomposite by ultrasound-assisted mechanical mixing method for fabricating photoanode to upgrade the performance and stability of dye-sensitized solar cell

An investigation on surface modified TiO2 incorporated with graphene oxide for dye-sensitized solar cell

Designing of $$\hbox {tio}_{2}$$–rgo Nanocomposite-Based Photoanode to Enhance the Performance of Dye-Sensitized Solar Cells

Designing of $$\hbox {TiO}_{2}$$ TiO 2 –rGO nanocomposite-based photoanode to enhance the performance of dye-sensitized solar cells

Synthesis of titanium dioxide/reduced graphene oxide nanocomposite material via the incorporated hydrothermal co-precipitation method for fabricating photoanode in dye-sensitized solar cell

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells