Abstract:This study aims to explore the mechanism under which ash deposition propensity is improved by coal blending in a real modern boiler situation. In this paper, Zhundong coal (ZD), from northwestern China, known to have a heavy ash deposition problem in boilers, was blended with Jincheng anthracite (JC), which has a high ash fusion temperature (AFT). The density composition of the coal blend, which reflects the mineral distribution in pulverized coals, was found to change during the intergrinding process. The higher rank coal JC was found to be more concentrated in its lower and highest density fractions. The variances in the chemical composition among density fractions in the pulverized coal blend were found greatly narrowed as compared with the parent coals. AFT results indicate that the ash melting behavior in the coal blend (ZD/JC = 50:50) varies with density, which is confirmed by corresponding slag contents calculated with FactSage 7.1. Particle size distributions of the density fractions in ZD, JC, and the coal blend were determined with a laser particle analyzer. The size distribution of ash particles in each density fraction was estimated according to the char morphology, which is deduced from the ash content and coal particle size distribution. Minerals in the lowest density fractions will form ash with a particle size of around 2 μm. Included minerals in the medium density fractions will form ash particles with size related to its ash content, and excluded minerals will undergo slight fragmentation and have a ash particle size similar to the corresponding coal particles. A comprehensive comparison between ash volume, ash particle size, and softening temperature indicates that ash deposition propensity of the coal blend is improved not only because of an apparent increase in AFT but also because of an apparent decrease in the total volume of ash particles possibly arriving on the deposition surface.

Analysis on Factors Influencing HGI and Crushing Behaviors of Blended Coals

Experimental Investigation in the Grinding Behavior and the Comminuting Character of Coals of Different Rank

Study on the Variation of Coal Properties for Different Coal Diameters and Its Effects on Combustion Characteristics

Impact of Coal Types and Pulverizing Methods on the Thermal Performance of Blending Coal-Fired Boilers and Their Operational Optimization

Granularity Collocation of Single Coal on Comprehensive Combustion of Blends

Research on 1050MW Unit Bituminous Coal Boiler Blending Baiyinhua Lignite

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Effect of chemical, mineralogical, and petrographic properties on the grindability of a South African Highveld coal

Study on Ash Fusion Process of Blended Coal by TG-DSC

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

Effect of Microwave Irradiation on Improving Coal Grindability

Non-isothermal Thermogravimetric Investigation on Mutual Effect Between Bituminite and Anthracite in Blends for Blast Furnace Injection

Ignition Characteristic of Blended Coal in a Drop-Tube Furnace

Co-combustion of Coal and Carbonaceous Wastes: Thermogravimetric Analysis

Pore Characteristics and Slurryability of Coal Blends

STUDY ON CORRELATIVITY BETWEEN UNBURNED CARBON IN FLY ASH OF BOILERS AND THE COMBUSTION PROPERTIES OF COAL

Mineral Distribution in Pulverized Blended Zhundong Coal and Its Influence on Ash Deposition Propensity in a Real Modern Boiler Situation

Thermogravimetric Analysis On The Combustion Characteristics For Blended Coals

Experimental study on the comprehensive behavior of combustion for blended coals

Tga Studies On The Combustion Characteristics Of Bituminous Coal Blends