Abstract:The combustibility of modified coal powder was tested by self-made combustion device and thermal analysis device, and then compared to original samples. With the help of self-made combustion device, the combustion ratio can be measured. With the help of thermal analysis device, the combustibility of coal powder at different temperatures can be precisely and thoroughly studied. Through the comparision of modified and original coal powder, it can be concluded that the coal powder combustion achieved improvement. When the modified-power is 264 watts, the best modified-time of Yangquan anthracite is 40 seconds. The combustion ratio of the best modified coal powder increases by 10.4%. In order to thoroughly study the combustibility of coal powder, the reactivity of coal powder with CO2 was analyzed by thermal analysis device. The results indicated that the reactivity between modified Yangquan anthracite powder and CO2 between 450° and 650° was slightly worse than original coal powder, while same or nearly same at other temperatures. In order to study the mechanism of modification on coal powder, morphology and chemical compositions of coal powder before and after modification were studied by utilizing scanning electron microscopy and X-ray diffraction. The photos took by SEM showed that the air holes on the surface of coal particles increased as the extension of time. But when time exceeded some ranges, the air holes morphology seemed to be destroyed. The combustion ratio reached the peak when air holes morphology was at the best condition. The results of X-ray diffraction indicated that the chemical composition of coal powder barely changed with the modification of low power and short time. It can be concluded that microwave modification has no effect on the chemical composition of coal powder. © 2011 IEEE.

Experimental Investigation in the Grinding Behavior and the Comminuting Character of Coals of Different Rank

Study on the Variation of Coal Properties for Different Coal Diameters and Its Effects on Combustion Characteristics

Analysis on Factors Influencing HGI and Crushing Behaviors of Blended Coals

Effect of Microwave Irradiation on Improving Coal Grindability

Effect of chemical, mineralogical, and petrographic properties on the grindability of a South African Highveld coal

Experimental research on combustion of modification Yangquan coal

Experimental study on geometric parameters of pore structure and quantitative evaluation of complexity of pulverized coal with different metamorphic degrees

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

Grinding kinetics of coal in wet ball-milling using the Taguchi method

An Investigation of the Effect of Particle Size on Discharge Behavior of Pulverized Coal

Nano-mechanical Properties and Pore-Scale Characterization of Different Rank Coals

Research status of drying and crushing characteristics of lignite

The effect of the grinding process on pore structures, functional groups and release characteristic of flash pyrolysis of superfine pulverized coal

Experimental Study On The Comprehensive Behavior Of Combustion For Blended Coals

Pulverized coal petrography and combustion characterises

Effect of the Pyrolysis Temperature on the Grindability of Semi-cokes Produced by Two Kinds of Low-Rank Coals

Influence of Coal Particle Size on the Combustion Characteristics of Yuanbaoshan Lignite

Effect of raw coal grindab il ty on the unifor mity of pulverized blended coal for entrained-flow pulverized coal gasification

Investigation on Slurryability and Combustion Characteristic of Russian Coals

Experimental study on coal combustion at microgravity

Combustion Kinetic Analysis of Group A Coal from Huainan Mining Area based on TG Experiment