Abstract:A thermodynamic property formulation for standard dry air based upon available experimental p–ρ–T, heat capacity, speed of sound, and vapor–liquid equilibrium data is presented. This formulation is valid for liquid, vapor, and supercritical air at temperatures from the solidification point on the bubble-point curve (59.75 K) to 2000 K at pressures up to 2000 MPa. In the absence of reliable experimental data for air above 873 K and 70 MPa, air properties were predicted from nitrogen data in this region. These values were included in the determination of the formulation to extend the range of validity. Experimental shock tube measurements on air give an indication of the extrapolation behavior of the equation of state up to temperatures and pressures of 5000 K and 28 GPa. The available measurements of thermodynamic properties of air are summarized and analyzed. Separate ancillary equations for the calculation of dew and bubble-point pressures and densities of air are presented. In the range from the solidification point to 873 K at pressures to 70 MPa, the estimated uncertainty of density values calculated with the equation of state is 0.1%. The estimated uncertainty of calculated speed of sound values is 0.2% and that for calculated heat capacities is 1%. At temperatures above 873 K and 70 MPa, the estimated uncertainty of calculated density values is 0.5% increasing to 1.0% at 2000 K and 2000 MPa. In addition to the equation of state for standard air, a mixture model explicit in Helmholtz energy has been developed which is capable of calculating the thermodynamic properties of mixtures containing nitrogen, argon, and oxygen. This model is valid for temperatures from the solidification point on the bubble-point curve to 1000 K at pressures up to 100 MPa over all compositions. The Helmholtz energy of the mixture is the sum of the ideal gas contribution, the real gas contribution, and the contribution from mixing. The contribution from mixing is given by a single generalized equation which is applied to all mixtures used in this work. The independent variables are the reduced density and reduced temperature. The model may be used to calculate the thermodynamic properties of mixtures at various compositions including dew and bubble-point properties and critical points. It incorporates the most accurate published equation of state for each pure fluid. The mixture model may be used to calculate the properties of mixtures generally within the experimental accuracies of the available measured properties. The estimated uncertainty of calculated properties is 0.1% in density, 0.2% in the speed of sound, and 1% in heat capacities. Calculated dew and bubble-point pressures are generally accurate to within 1%.

Segment Calculation of Thermodynamic Properties for Moist Air in Wide Range of Temperature and Pressure

Thermodynamic properties calculation method for moist air: 173 to 647 K

Investigation on the Vapor–Liquid Equilibrium for the Ternary Mixture HFC-32 + HFC-125 + HFC-161 at Temperatures from 265.15 K to 303.15 K

A Modified Patel-Teja Equation of State for Cryogenic Fluids*

Prediction of Thermodynamic Property Using Shape Factor CSP

Vapor–liquid Equilibrium of Difluoromethane +1,1,1,2-Tetrafluoroethane Systems over a Temperature Range from 258.15 to 343.15K

Reappraising the appropriate calculation of a common meteorological quantity: Potential Temperature.

A variational method for estimating surface fluxes with mass conservation constraint

Thermological principle of moist air heat and moisture conversion processes

An Analysis for Heat and Moisture Transfer Effect in Air-Water Or-Hydroscopic Solution ( Ⅰ ) Reachable Handling Region

A Unified Treatment of General Fluid Thermodynamics and Its Application to a Preconditioning Scheme

Thermodynamic consistency and structure-preservation in summation by parts methods for the moist compressible Euler equations

Thermodynamic Properties of Air and Mixtures of Nitrogen, Argon, and Oxygen From 60 to 2000 K at Pressures to 2000 MPa

Intermediate pressure optimum mathematical calculation model in the two-stage LiBr/H2O absorption refrigeration cycle.

Measurement of critical properties for the binary mixture of R744 (carbon dioxide) + R1234ze(E) (trans-1,3,3,3-tetrafluoropropene)

Efficient and Accurate Computation Scheme of P–t Thermodynamic Properties of Water and Steam

A Generalized Simple Model for Saturated Thermodynamic Properties of Refrigerants

Experimental and analytical investigation on flow condensation heat transfer of zeotropic mixtures of tetrafluoromethane/ethane

The p-V-T Relationship of Liquid Phase, Dew and Bubble Point Pressures and Densities of Binary Mixtures

A property diagram-based method for synthesis and parameter optimization of heat and mass transfer in moist air–water/aqueous solution systems

Rapid Calculation for Density of Water and Steam on P-T Thermodynamic Surface