Abstract:Hierarchical ZSM-5 catalysts were prepared by desilication using NaOH, Na2CO3 and TPAOH with different concentrations under the same treatment conditions. Their structures and acidities were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), N-2 adsorption and desorption (N-2-BET) and ammonia temperature-programmed desorption (NH3-TPD). The catalytic fast pyrolysis (CFP) of cellulose to produce aromatics over the hierarchical ZSM-5 catalysts prepared using different alkali treatments was investigated. The alkali treatment by Na2CO3 (0.4 similar to 0.8 M) was much milder than treatment by NaOH, which allowed the desilication process to be highly controllable, resulting in an increase of both the amount and strength of the strong acid sites, and the formation of hierarchical structures combining micro- and mesoporosity. The organic hydroxide TPAOH did not change the pore structure of ZSM-5, but it greatly increased the relative crystallinity. The CFP of cellulose with HZSM-5 produced 35.5% liquid aromatic hydrocarbons and 32.7% coke. The yield of aromatics increased after Na2CO3 treatment but decreased after NaOH treatment. In addition, the yield of coke showed the opposite trend. The highest aromatic yield (38.2%) and lowest coke yield were obtained in the CFP of cellulose with the desilicated zeolite treated with 0.6 M Na2CO3. The increased acidity in hierarchical ZSM-5 treated with Na2CO3 increased the selectivity of highly valuable aromatics, such as benzene, toluene, and xylene, and decreased the selectivity of large aromatics. TPAOH-treated HZSM-5 showed a slightly increased yield of aromatics due to the repair effect of TPAOH, but this treatment did not form a mesoporous structure.

Catalytic Pyrolysis of Cellulose with Zeolites

Catalytic Fast Pyrolysis of Cellulose in a Microreactor System Using Hierarchical Zsm-5 Zeolites Treated with Various Alkalis

Preparation of aromatics from fast catalytic pyrolysis of cellulose over alkali-treated HZSM-5

[Influence of ZSM-5(38)/Al-MCM-41 Composite Molecular Sieve Catalysts on Pyrolysis of Cellulose].

Synthesis and Physicochemical Characterization of Hierarchical ZSM-5: Effect of Organosilanes on the Catalyst Properties and Performance in the Catalytic Fast Pyrolysis of Biomass

Catalytic pyrolysis of xylan-based hemicellulose over zeolites

Catalytic Fast Pyrolysis of Cellulose to Aromatics over Hierarchical Nanocrystalline ZSM-5 Zeolites Prepared Using Sucrose As a Template

Study on ZSM-5 Catalytic Pyrolysis Mechanism of Cellulose Based on the Py-GC/MS and the Density Functional Theory

Study on the Pyrolysis of Cellulose for Bio-Oil with Mesoporous Molecular Sieve Catalysts.

Controlled Synthesis of Hierarchical ZSM-5 for Catalytic Fast Pyrolysis of Cellulose to Aromatics

Catalytic Pyrolysis Of Hemicellulose To Produce Aromatic Hydrocarbons

Catalytic Fast Pyrolysis of Cellulose with Hzsm-5

Catalytic Pyrolysis of Individual Components of Lignocellulosic Biomass

Tailoring ZSM-5 Zeolites for the Fast Pyrolysis of Biomass to Aromatic Hydrocarbons.

Catalytic conversion of cellulose over mesoporous Y zeolite

Catalytic Pyrolysis of Mannose As a Model Compound of Hemicellulose over Zeolites

Catalytic Pyrolysis of Microcrystalline Cellulose with Five Molecular Sieve Based Catalysts in Py-GC-MS

Thermal behaviors and kinetics for cellulose pyrolysis using CexZr1−x-T catalysts

Catalytic Pyrolysis of Cellulose with Sulfated Metal Oxides: A Promising Method for Obtaining High Yield of Light Furan Compounds

Co‐pyrolysis characteristics of polysaccharides‐cellulose and the co‐pyrolyzed compound distributions over two kinds of zeolite catalysts

Catalytic fast pyrolysis of cellulose over Ce0.8Zr0.2-xAlxO2 catalysts to produce aromatic hydrocarbons: Analytical Py-GC × GC/MS