Abstract:Hierarchical ZSM-5 catalysts were prepared by desilication using NaOH, Na2CO3 and TPAOH with different concentrations under the same treatment conditions. Their structures and acidities were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), N-2 adsorption and desorption (N-2-BET) and ammonia temperature-programmed desorption (NH3-TPD). The catalytic fast pyrolysis (CFP) of cellulose to produce aromatics over the hierarchical ZSM-5 catalysts prepared using different alkali treatments was investigated. The alkali treatment by Na2CO3 (0.4 similar to 0.8 M) was much milder than treatment by NaOH, which allowed the desilication process to be highly controllable, resulting in an increase of both the amount and strength of the strong acid sites, and the formation of hierarchical structures combining micro- and mesoporosity. The organic hydroxide TPAOH did not change the pore structure of ZSM-5, but it greatly increased the relative crystallinity. The CFP of cellulose with HZSM-5 produced 35.5% liquid aromatic hydrocarbons and 32.7% coke. The yield of aromatics increased after Na2CO3 treatment but decreased after NaOH treatment. In addition, the yield of coke showed the opposite trend. The highest aromatic yield (38.2%) and lowest coke yield were obtained in the CFP of cellulose with the desilicated zeolite treated with 0.6 M Na2CO3. The increased acidity in hierarchical ZSM-5 treated with Na2CO3 increased the selectivity of highly valuable aromatics, such as benzene, toluene, and xylene, and decreased the selectivity of large aromatics. TPAOH-treated HZSM-5 showed a slightly increased yield of aromatics due to the repair effect of TPAOH, but this treatment did not form a mesoporous structure.

Catalytic fast pyrolysis of cellulose over Ce0.8Zr0.2-xAlxO2 catalysts to produce aromatic hydrocarbons: Analytical Py-GC × GC/MS

Catalytic Fast Pyrolysis of Cellulose in a Microreactor System Using Hierarchical Zsm-5 Zeolites Treated with Various Alkalis

Preparation of aromatics from fast catalytic pyrolysis of cellulose over alkali-treated HZSM-5

[Influence of ZSM-5(38)/Al-MCM-41 Composite Molecular Sieve Catalysts on Pyrolysis of Cellulose].

Boosting the selectivity of aromatic hydrocarbons via ex-situ catalytic fast pyrolysis of cellulose over Pt–Sn–Ce/γ-Al2O3 catalyst

Study on the Pyrolysis of Cellulose for Bio-Oil with Mesoporous Molecular Sieve Catalysts.

Catalytic Fast Pyrolysis of Rice Straw to Aromatic Compounds over Hierarchical HZSM-5 Produced by Alkali Treatment and Metal-Modification

Catalytic Pyrolysis Of Hemicellulose To Produce Aromatic Hydrocarbons

Catalytic Pyrolysis of Microcrystalline Cellulose with Five Molecular Sieve Based Catalysts in Py-GC-MS

Thermal behaviors and kinetics for cellulose pyrolysis using CexZr1−x-T catalysts

Catalytic Upgrading of Fast Pyrolysis Products with Fe-, Zr-, and Co-Modified Zeolites Based on Pyrolyzer–GC/MS Analysis

Promotion of Monocyclic Aromatics by Catalytic Fast Pyrolysis of Biomass with Modified HZSM-5

Catalytic Fast Co-Pyrolysis of Bamboo Sawdust and Waste Plastics for Enhanced Aromatic Hydrocarbons Production Using Synthesized CeO2/γ-Al2O3 and HZSM-5

Study on ZSM-5 Catalytic Pyrolysis Mechanism of Cellulose Based on the Py-GC/MS and the Density Functional Theory

Catalytic Pyrolysis of Individual Components of Lignocellulosic Biomass

Enhancing the Production of Light Olefins and Aromatics from Catalytic Fast Pyrolysis of Cellulose in a Dual-Catalyst Fixed Bed Reactor

Enhancing High Selectivity Production of Light Aromatics from In-Situ Catalytic Upgrading of Cellulose Pyrolysis Vapors by Regulating Hierarchical Core-Shell ZSM-5@MCM-41

Performance of Catalytic Fast Pyrolysis Using a Γ-Al2o3 Catalyst with Compound Modification of ZrO2 and CeO2

Catalytic Pyrolysis of Cellulose with Zeolites

On-line catalytic cracking of vapors from cellulose fast pyrolysis

Cellulose-lignin Interactions During Catalytic Pyrolysis with Different Zeolite Catalysts