Abstract:The presence of oxide layers covering the surface of aluminum is known to impede the hydrogen production reaction. These oxide layers can be broken by adding catalysts and increasing the aluminum-water reaction temperature. Common catalysts used are alkaline catalysts that are capable of achieving high hydrogen production rates in a short time at lower temperatures, while intermediate temperatures of above 50 °C can accelerate the hydration reaction of the oxide layer. Herein, the mixture of NaOH and NaAlO2 catalysts was employed to attain a stable NaAlO2 solution and continuous reaction of NaOH and aluminum. This research analyzes the influence of temperature between 32 and 80 °C on the aluminum, 0.3 M NaOH and 0.001 M NaAlO2 catalysts solution at atmospheric pressure. All solutions produces a similar hydrogen yields and rate. Solutions containing NaAlO2 indicate reverse reaction that surpressing the Al(OH)3 precipitation. Residue from the reaction is investigated using X-ray Diffraction (XRD), Fourier Transform Infra Red (FTIR), and Scanning Electron Microscope (SEM). The volume of hydrogen produced is evaluated using a mathematical mass reduction and shrinking core model. The rate of hydrogen production depends largely on the aqueous solution's temperature, with an activation energy of 47.4 kJ/mol. Based on the findings, it is readily apparent that the reaction only produced gibbsite and bayerite, with gibbsite and bayerite being dominant at 32–70 °C and 80 °C, respectively. The mass reduction model fits well with the present results with only an average 5.1 mL deviation, whereas the shrinking core model generally tends to result in underestimated values with an average deviation of 23.9 mL. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Reaction of Aluminium with Alkaline Sodium Stannate Solution As a Controlled Source of Hydrogen

Controlled Hydrogen Generation by Reaction of Aluminum/sodium Hydroxide/sodium Stannate Solid Mixture with Water

Study of hydrogen generation from the hydrolysis of aluminum in NaOH solution

Aluminum Hydrolysis for Hydrogen Generation Enhanced by Sodium Hydride

Kinetic Study of the Aluminum–water Reaction Using NaOH/NaAlO2 Catalyst for Hydrogen Production from Aluminum Cans Waste

Enhanced hydrogen generation from Al-water reaction mediated by metal salts

Corrosion and Anodic Behaviors of Pure Aluminum in a Novel Alkaline Electrolyte

Promoting Al hydrolysis via MgH2 and NaOH addition

The Effects of Surface Treatment and Stannate As an Electrolyte Additive on the Corrosion and Electrochemical Performances of Pure Aluminum in an Alkaline Methanol–water Solution

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Study of the Controllable Reactivity of Aluminum Alloys and Their Promising Application for Hydrogen Generation

Improved Hydrogen Generation from the Hydrolysis of Aluminum Ball Milled with Hydride

Rapid hydrogen generation from the reaction of aluminum/activated charcoal composite with alkaline solution

Combined Usage of Sodium Borohydride and Aluminum Powder for High‐performance Hydrogen Generation

Hydrogen generation by aluminum-water reaction

Influencing Factors and Inhibition of Hydrogen Produced by Aluminum and Water Reaction

Hydrogen Generation By The Hydrolysis Reaction Of Ball-Milled Aluminium Lithium Alloys

Hydrogen Generation by Splitting Water with Al-Li Alloys

Materials to Generate Hydrogen Continuously by Aluminium and Water Reaction at Room Temperature and Normal Pressure

Dynamic hydrogen generation phenomenon of aluminum fed liquid phase Ga–In alloy inside NaOH electrolyte

Mechanism of Hydrogen Generation from Low Melting Point Elements (ga, In, Sn) on Aluminum Alloy Hydrolysis