Abstract:To optimize the drying process of bamboo bundles, this study investigates the heat and mass transfer behavior during the drying process by using temperature sensors to measure the temperature field at different positions and track the overall moisture content over time. Additionally, a heat transfer model is used to simulate and predict the drying process. The analysis of the experimental results indicates that the diameter of the bamboo bundles has a greater impact on the drying rate than the drying temperature. At the same temperature, the drying time significantly decreases as the temperature increases. Under drying conditions at 80 °C, the average drying rate constant is 0.072 for bamboo bundles with a diameter of 40 mm, whereas it is only 0.015 for bundles with a diameter of 100 mm. Using Newton's law of cooling, the convective heat transfer coefficient calculation method was derived. The average convective heat transfer coefficients at 40, 60, and 80 °C were calculated to be 6.16 W/(m 2 K), 7.14 W/(m 2 K), and 7.22 W/(m 2 K), respectively. A mathematical model was established for the temperature at the center of the bamboo bundles, the temperature of the drying medium, the diameter of the bamboo bundles, and the drying time. This model effectively simulates the temperature variation inside the bamboo bundles, and the temperature simulation data fits well with the measured values, with a standard error of less than 2.8 °C and a prediction error of less than 6.1%. This coupled model and method provide a theoretical basis for predicting and controlling the bamboo bundle drying process, reducing energy and time consumption in actual production.

RESEARCH ON DRYING MECHANISM OF HEAT AND MASS TRANSFER OF STALK (Ⅱ)——KINETICS NUMERICAL SIMULATION

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

SIMULATION OF BIOMASS DRYING IN A DIRECT CONTACT ROTARY DRYER

Research progress of numerical simulation on heat and moisture transfer in porous textiles

The simulation analysis and experiment of drying thin-layer radish strips

Heat-transfer simulation of slice potato during drying.

Heat and Mass Transfer Simulation of Intensification Drying Technologies: Current Status and Future Trends

A Heat and Mass Transfer Model of Peanut Convective Drying Based on a Two-Component Structure

Mass-Transfer Simulation Software Study of Sliced Porous Production During Convection Drying Process

Modeling of Muti-layer Far-Infrared Dryer

Mathematical modelling of heat and mass transfer in agricultural grain drying

Numerical Simulation of Heat and Mass Transfer in Sludge Low-Temperature Drying Process

Drying characteristics of bamboo bundles and the heat transfer model

Simulation of Heat and Mass Transfer of Cut Tobacco in a Batch Rotary Dryer by Multi-Objective Optimization

Theoretical and experimental research on heat and mass transfer in a turbine thin layer dryer

Modeling moisture and heat transfer during superheated steam wood drying considering potential evaporation interface migration

Simulation and experimental study of heat-moisture-solute transfer during drying process of porous media

A Thermo-Hydro-Mechanics Bidirectional Coupling Mathematical Model for Drying of Biological Porous Medium

Drying Kinetics of a Single Biomass Particle Using Fick’s Second Law of Diffusion

Effect of heat and mass transfer coefficients on force convective drying of porous media

Computer simulation of a rotary dryer. Part II: Heat and Mass Transfer