Abstract:To directionally convert sludge into the high-quality syngas, the effects of various parameters on the biogas produced by the sludge microwave pyrolysis are explored, and the syngas generation mechanism under the synergistic effect of parameters is revealed. The results showed that the pyrolysis final temperature, reaction time, and the amount of the microwave absorber were the key factors that affected the biogas yield. A response surface analysis was used to explore the synergistic effect of each key parameter on the yield and the lower heating vale (LHV) of syngas. The pyrolysis temperature was the key to driving syngas generation. Properly prolonging the reaction time decreased the formation of tar by-products and increased the syngas yield. The addition of a microwave absorber increased the heating rate by enhancing the conversion efficiency of microwave energy, and this contributed to accelerating the dehydrogenation and the Boudouard reactions to promote the generation of H2 and CO. Under high temperature conditions (900 °C), a higher syngas yield (10.25–34.31 mol/kgDS) and LHV (4.85–14.53 MJ/kgDS) were obtained in a shorter period time by synergistically optimizing the amount of microwave absorbers (8–10 g) and the reaction time (28–40 min). As the pyrolysis temperature increased, the H2 content gradually rose to the peak, while the content of CO continued to increase. By analyzing the evolution of the specific pyrolysis products, the secondary pyrolysis of bio-oil at high temperatures and the Boudouard reaction were found to be the primary pathways that promoted syngas generation. This research provides strategic guidance for producing high-quality syngas using the microwave pyrolysis of waste biomass, thereby minimizing the exploration cost of basic experiments and providing directional control of the syngas quality.

Experimental Research of Microwave Pyrolysis about Paper Mill Sludge

Experimental investigtion of paper mill sludge pyrolysis in the laboratory-scale rotary kiln

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Comprehensive kinetic modeling and product distribution for pyrolysis of pulp and paper mill sludge

Effect of Active Carbon on Microwave Pyrolysis Characteristics of Petroleum Sludge

Study on Desulfurization and Denitration of with Industry Solid Waste by Microwave

Mechanism of Magnetic Nanoparticle Enhanced Microwave Pyrolysis for Oily Sludge

Modifying Pyrolysis Behavior and Products Distribution of Sewage Sludge and Water Hyacinth by Microwave Pretreatment and Subsequent Calcium Oxide Catalytic Co-Pyrolysis

Comparative study by microwave pyrolysis and conventional pyrolysis of pharmaceutical sludge: Resourceful disposal and antibiotic adsorption

Investigation of co-pyrolysis characteristics and kinetics of municipal solid waste and paper sludge through TG-FTIR and DAEM

Thermogravimetric analysis of the co-combustion of coal and paper mill sludge

Synergistic optimization of syngas quality and heavy metal immobilization during continuous microwave pyrolysis of sludge: Competitive relationships, reaction mechanisms, and energy efficiency assessment

Scaled-up microwave pyrolysis of sludge for hydrogen-rich biogas and life cycle assessment: Parameters synergistic optimization, carbon footprint analysis and technology upgrade

Valorization of sludge using microwave pyrolysis for green bio-energy: Combined effects of key parameters on the directional optimization of high-quality syngas

A kinetics study of microwave pyrolysis of sewage sludge and corn stalk mixture

Simultaneous Recovery of Organic and Inorganic Content of Paper Deinking Residue Through Low-Temperature Microwave-Assisted Pyrolysis

Microwave pyrolysis of oily sludge under different control modes

Thermogravimetric analysis of the co-combustion of paper mill sludge and municipal solid waste

Enhancing Anaerobic Biodegradability and Dewaterability of Sewage Sludge by Microwave Irradiation

Microwave Pyrolysis of Sewage Sludge for Bio-Oil Production: Effects of Organic Components and Mechanisms

Simultaneous implementation of sludge dewatering and solid biofuel production by microwave torrefaction