Abstract:To directionally convert sludge into the high-quality syngas, the effects of various parameters on the biogas produced by the sludge microwave pyrolysis are explored, and the syngas generation mechanism under the synergistic effect of parameters is revealed. The results showed that the pyrolysis final temperature, reaction time, and the amount of the microwave absorber were the key factors that affected the biogas yield. A response surface analysis was used to explore the synergistic effect of each key parameter on the yield and the lower heating vale (LHV) of syngas. The pyrolysis temperature was the key to driving syngas generation. Properly prolonging the reaction time decreased the formation of tar by-products and increased the syngas yield. The addition of a microwave absorber increased the heating rate by enhancing the conversion efficiency of microwave energy, and this contributed to accelerating the dehydrogenation and the Boudouard reactions to promote the generation of H2 and CO. Under high temperature conditions (900 °C), a higher syngas yield (10.25–34.31 mol/kgDS) and LHV (4.85–14.53 MJ/kgDS) were obtained in a shorter period time by synergistically optimizing the amount of microwave absorbers (8–10 g) and the reaction time (28–40 min). As the pyrolysis temperature increased, the H2 content gradually rose to the peak, while the content of CO continued to increase. By analyzing the evolution of the specific pyrolysis products, the secondary pyrolysis of bio-oil at high temperatures and the Boudouard reaction were found to be the primary pathways that promoted syngas generation. This research provides strategic guidance for producing high-quality syngas using the microwave pyrolysis of waste biomass, thereby minimizing the exploration cost of basic experiments and providing directional control of the syngas quality.

Effect of Active Carbon on Microwave Pyrolysis Characteristics of Petroleum Sludge

Experimental study on reacting conditions of microwave pyrolyzing sewage sludge induced by active carbon

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

The Important Role of Microwave Receptors in Bio-Fuel Production by Microwave-Induced Pyrolysis of Sewage Sludge.

Pyrolysis Characteristics and Products Distribution of Petroleum Sludges

Effect of nano-metal oxides types on oil sludge during microwave pyrolysis

Effect of Microwave Treatment on Structural Changes and Gasification Reactivity of Petroleum Coke

Effect of Microwave Activation on the Characteristics of Petroleum Coke Gasification

Development and Application of a Continuous Fast Microwave Pyrolysis System for Sewage Sludge Utilization

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

Mechanism of Magnetic Nanoparticle Enhanced Microwave Pyrolysis for Oily Sludge

Preparation of biochar and its adsorbing performance evaluation in the petroleum hydrocarbon

Modifying Pyrolysis Behavior and Products Distribution of Sewage Sludge and Water Hyacinth by Microwave Pretreatment and Subsequent Calcium Oxide Catalytic Co-Pyrolysis

Microwave Pyrolysis of Sewage Sludge for Bio-Oil Production: Effects of Organic Components and Mechanisms

Mechanism of gas production under microwave/conventional pyrolysis of sewage sludge: Mechanism of microwave energy action on oxygen-containing functional groups

Preparation of Sludge Absorbent from Sewage Sludge by Microwave- Induced Pyrolysis

Valorization of sludge using microwave pyrolysis for green bio-energy: Combined effects of key parameters on the directional optimization of high-quality syngas

Kinetics study of pyrolysis of petroleum sludge and characterization of char

Homogenizing microwave pyrolysis of oily sludge using nano-Fe 3 O 4 : volatile gas product analysis

Characteristics Analysis of Sewage Sludge Pyrolyzed by Traditional and Microwavable Heat Sources Using TG-FTIR

Auxiliary Effect of CO2 on Pyrolysis of Oily Sludge.